Thank you for purchasing our Studio Designs, Inc. Gracias por comprar nuestro mueble Studio Designs, Inc. Merci d’avoir acheté un meuble Studio Designs, Inc. CUTTING TABLE WITH GRID #13385 Charcoal/White • Carbón/Blanco • Charbon/Blanc #13386 Silver/White • Plateado/Blanco • Argenté/Blanc Office: 562.942.0492 Product Support Line: 866.942.0492 www.studiodesigns.com Rev. 6.6.
ASSEMBLY INSTRUCTIONS - IMPORTANT: Carefully unpack and identify each component before attempting to assemble. Refer to parts list. Please take care when assembling the unit and always set the parts on a clean, soft surface. Do not use power tools to assemble. A Phillips screwdriver may be required for assembly. If you require any assistance with assembly, parts, or information on other products, please visit our website: www.studiodesigns.com or call us.
PARTS LIST / LISTA DE PARTES / LISTE DES PIÈCES DÈTACHÉES DESCRIPTION / DESCRIPCIÓN / DESCRIPTION QTY / CANT/ QTÉ 1. Side Panel (A and B) Panel Lateral (A y B) Panneau Latéral (A et B) 2 2. Center Panel Panel Central Panneau Central 1 3. Bottom Shelf Estante Inferior Étagère Inférieure 1 4. Frame Marco Cadre 2 5. Leg Pata Jambe 2 6. Lower Crossbar Travesaño Inferior Barre Inférieure 2 7. Upper Crossbar Travesaño Superior Barre Supérieure 1 8.
PARTS LIST / LISTA DE PARTES / LISTE DES PIÈCES DÈTACHÉES DESCRIPTION / DESCRIPCIÓN / DESCRIPTION QTY / CANT/ QTÉ 12. Knob Perilla Pommeau 12 13. Hinge Bisagra Charnière 8 14. Allen Bolt – 1/4" x 2-3/8" Perno Allen – 6mm x 60mm Boulon Allen – 6mm x 60mm 4 15. Allen Bolt – 1/4" x 1-5/8" Perno Allen – 6mm x 40mm Boulon Allen – 6mm x 40mm 6 16. Allen Bolt – 1/4" x 1-3/8" Perno Allen – 6mm x 35mm Boulon Allen – 6mm x 35mm 8 17.
1 Hole faces up. Agujero hacia arriba. Trous vers le haut. 12 21 9 12 4 Make sure nut is screwed in before installation. Asegúrese que la tuerca esté atornillada antes de instalar. Assurez-vous que l’écrouest bien vissé avant l’installation. Repeat Step for second Frame. • Repita el Paso para el segundo Marco. • Répétez l’étape pour la deuxième Cadre. 2 4 15 6 Cutting Table with Grid 4 15 p.
3 17 8 17 17 8 17 Cutting Table with Grid p.
4 15 7 15 Cutting Table with Grid p.
5 3 16 16 6 Make sure nut is screwed in before installation. 12 Asegúrese que la tuerca esté atornillada antes de instalar. Assurez-vous que l’écrouest bien vissé avant l’installation. Hole faces up. Agujero hacia arriba. Trous vers le haut. 5 9 20 Repeat Step for second Leg. • Repita el Paso para la segunda Pata. • Répétez l’étape pour la deuxième Jambe. Cutting Table with Grid p.
7 14 14 11 14 11 11 14 11 Cutting Table with Grid p.
8 18 19 13 1A 19 2 1B Install all Screws (18) half-way until all 48 are in, then fullty tighten all screws. Instale todos los Tornillos (18) a la mitad hasta que estén instalados los 48, luego apriete completamente todos los tornillos. Installez toutes les Vis (18) à mi-chemin jusqu’à ce que les 48 soient en place, puis serrez complètement toutes les vis. Grid side faces down. Cuadrícula hacia abajo. Quadrillage vers le bas. Close legs and carefully turn the frame over.
10 Insert Legs into Metal Pins and carefully stand table up. Inserte las Patas en las Clavijas y cuidadosamente vuelque la mesa. Insérez les Jambes dans les Goujons et inclinez la table avec précaution. CAUTION!: Use two people. ¡PRECAUCIÓN!: Use dos personas. PRÉCAUTION: Utilisez deux personnes. 22 10 Cutting Table with Grid p.
LIMITED WARRANTY Studio Designs (the “Company”) warrants to the original purchaser that this product will be free from defects in its workmanship and materials, under normal residential use and service conditions, as described herein.
