Instructions / Assembly

Step 6:

Insert the Wire Basket (D) into the

Sliders (E).

Step 7:

Repeat steps 5 and 6 to install the next

Wire Basket (D).

Step 8:

For the next two shelves, fasten a pair of

Slip Sleeves (B) around the grooves of

each pole. Slide the Wire Shelf (C) over

the top of the 4 poles until it rests snugly

over the slip sleeves.

Total Weight Capacity with Casters:

500 lbs/ 226.7 kg

Wire shelf with leveling feet:

250 lb / 113.3 kg

Wire Basket: 50 lbs/ 22.6 kg

TF160420

STORAGE ORGANIZER WITH PULL OUT BINS

Model No. 18595

ASSEMBLY INSTRUCTIONS

Seville Classics, Inc.

Torrance, CA 90501 USA

www.sevilleclassics.com

Please read and save these instructions

PAGE 1
Step 6: STORAGE ORGANIZER WITH PULL OUT BINS Model No. 18595 Insert the Wire Basket (D) into the Sliders (E). ASSEMBLY INSTRUCTIONS Step 7: Repeat steps 5 and 6 to install the next Wire Basket (D). Step 8: For the next two shelves, fasten a pair of Slip Sleeves (B) around the grooves of each pole. Slide the Wire Shelf (C) over the top of the 4 poles until it rests snugly over the slip sleeves. Total Weight Capacity with Casters: 500 lbs/ 226.7 kg Wire shelf with leveling feet: 250 lb / 113.
PAGE 2
Please make sure you have all the parts before assembly. A E 8 pcs Poles B 4 pcs Sliders F 21 pairs Slip Sleeves 2 pairs Wheels C 3 pcs Wire Shelves D 2 pcs Wire Baskets Step 3: Starting at the bottom, fasten a pair of Slip Sleeves (B) around the grooves of each pole. If necessary, move the sleeves slightly up or down until they snap into position.