Full Product Manual

ManualsBrandsSeville Classics ManualsDesksAIRLIFT Black Electric Standing Desk Converter with USB Charging and Keyboard Tray (Max. Height 19.1 in.)

Thank you for choosing Seville Classics! We hope that you enjoy your new sit-to-stand

desk. Please read through this user guide for parts list, instrucons, frequently asked

quesons and contact informaon.

Model #: OFF65806

AIRLIFT™ Electric Sit-to-Stand

Adjustable Desktop Converter Black

08-201708-2017

Summary of content (4 pages)

PAGE 1
AIRLIFT™ Electric Sit-to-Stand Adjustable Desktop Converter Black Model #: OFF65806 Thank you for choosing Seville Classics! We hope that you enjoy your new sit-to-stand desk. Please read through this user guide for parts list, instructions, frequently asked questions and contact information.
PAGE 2
Parts List Use Instructions 1. Locate controller on right side of desk. A. Airlift™ Desk (1) B. Brackets (2) Press to LIFT Press to LOWER FAQS C. Tray (1) Q. Can I attach a monitor stand to it? What about dual monitors? A. Yes! Be sure the desk is below it’s 33 lbs. maximum weight limit. Q. What size is the base? D. Allen wrench (1) A. Base measures 32.75 inches wide and 22 inches deep. Q. Do I need to plug it in? E. Wire clip (1) A. Yes! Works with any 120V outlet. Specifications F.
PAGE 3
Safety Assembly Instructions Failure to follow these instructions may result in property damage or STEP 1. Remove AIRLIFT™ DESK (A) from box and set on flat table. Weighs 50.7 lbs. personal injury Requires 2 people to lift DO NOT place devices on desk edge. DO NOT route wires through desk legs. STEP 2. Cut the plastic ties on both sides of the AIRLIFT™ DESK (A). STEP 3. Plug POWER CORD (G) into wall socket.
PAGE 4
STEP 4. Press the UP button on the controller to lift the AIRLIFT™ DESK (A). Cable Management WARNING: DO NOT PLACE HANDS ON DESK LEGS. MOVING PARTS CAN CRUSH. STEP 5. Flip TRAY (C) upside down. Attach BRACKETS (B) to underside of TRAY (C) with SCREWS (F) and screwdriver. ALWAYS route your POWER CORD (G) through the REAR of the desk. NEVER route cables through the legs of the desk. STEP 6. Hook BRACKETS (B) over the bolts on the inner legs of the AIRLIFT™ DESK (A).