Instructions

27
clEaninG anD mainTaininG ThE appliancE
Cleaning the dust container and lter
The lter should be cleaned if the suction power decreases when the rechargeable battery is fully charged.
Empty the dust container and, if necessary, leave it to dry before or after each time it is used to absorb water.
1. Make sure that the appliance is switched off and is not on charge.
2. Unlatch, remove and empty the dust container (“Emptying the dust container” on page 26).
3. Remove the lter holder, together with the lter, from the dust container.
4. Rinse out the dust container with clear water.
5. Turn the lter anti-clockwise to release it from the lter holder.
6. Knock out the lter and lter holder over a waste bin and remove any dirt with a soft brush as necessary.
7. If necessary, wash out the lter in soap solution and then allow it to dry completely.
8. Insert the lter in the lter holder and secure it by turning it clockwise.
9. Insert the lter holder in the dust container.
10. Secure the dust container on the appliance again.
Cleaning the brush roller
Soiling may prevent the brush roller from rotating freely. Clean the brush roller regularly. For additional informa-
tion, see  illustrated Quick Start Guide  Cleaning.
1. Make sure that the appliance is switched off and is not on charge.
2. Remove the oor nozzle from the appliance, if it is attached.
3. Unfasten the stop catch for the brush.
4. Remove the brush.
5. Remove any hairs and dirt from the brush; if necessary, use tweezers or scissors and do so carefully.
6. Re-insert the brush and secure it with the stop catch.
Cleaning the appliance
1. Make sure that the appliance is switched off and is not on charge.
2. Wipe the housing with a slightly damp cloth and then rub it dry.
TIP: Do not use any sharp, abrasive cleaning agents or hard brushes for cleaning.
Storing the appliance
 Store the appliance and accessories in a cool, dry place out of the reach of children.
 The additional attachments can also be stored on the wall mount.