Quick Start Guide
Table Of Contents
- [Introduction]
- 1 Electronic Shelf Labeling – A brief introduction
- 2 The G1 label family
- 3 What’s in your Smart Box?
- [Getting Started]
- 1 Latest Software and Documentation
- 2 Install software
- 3 Start Server and Client
- 4 Connect and configure Access Point AP-2010
- 5 Setup Security
- 6 Register labels
- 7 Start tagging
- 8 Integration
- [Troubleshooting]
- 1 FAQ
- 1.1 Running the ESL Server as a background service
- 1.2 Where can I find the license file for my SmartBox?
- 1.3 Deleting the demo articles
- 1.4 Establish a network configuration when no DHCP is available – Step by step
- 1.5 AP discovering with Bonjour Services
- 1.6 What can I do if the Status LED of the AP-2010 access point doesn’t turn blue?
- 1.7 Labels don’t come online
- 1.8 The encryption does not work
- 1.9 Unlocking labels
- 1.10 Starting Java applications
- 1.11 Encoding problems
- 1.12 Further documentation
- _Ref387048594
- _Ref386612307
- _Ref386612318
- Activati
- _Ref384813549
- _Ref388607844
- _Ref388607849
Quick Start Guide imagotag GmbH
Page 14 of 36
4 Connect and configure Access Point AP-2010
The AP-2010 by imagotag is the communication center in the store that transmits price
information to the labels. In order to ensure the communication between ESLServer, access
point AP-2010 and the labels the access point has to be configured at the start of the
ESLServer.
One way to configure the access point is on the client.
FIGURE 1-12: ESL Client Access Point Configuration
4.1 Connect and configure
Before labels are able to communication with the server at least one access point needs to be
configured. In standard configuration the AP-2010 should get an IP-address via DHCP
(recommended) and is accessible via imagotag AP-2010 web management interface:
URL: http://<host|ip>:8080
Login: admin/admin
Important Note: In this part of the Quick Start Guide it is assumed that a DHCP server is present
(you can find the steps to discover the access point without DHCP in the Troubleshooting
section at points Establish a network configuration when no DHCP is available – Step by step and
AP discovering with Bonjour Services).