User Manual

ManualsBrandsSerta ManualsFurniture & DecorAshland Fabric & Memory Foam Home Office Chair - Lure Light Gray

Chair Assembly Instructions

Carefully unpack all parts and identify them against the parts list before attempting to assemble. To avoid

scratching the components, assemble the chair on a protected surface.

Note: The casters sold with this chair are intended for use on carpet and not recommended for use on tile or

hard wood ﬂoors. Using these casters on tile or wood ﬂooring may cause ﬂoor surface damage, so please

consider purchasing a chairmat to protect your ﬂoor surfaces.

We are here to help if you have any questions, comments, or are in need of warranty replacement parts.

Visit our website at : www.truecustomersupport.com

Or call us toll free at : 1-855-372-2315

(Monday - Friday 6:00 am – 5:00 pm Paciﬁc Time)

Instrucciones de ensamblaje

Desembale todas las partes con cuidado e identifíquelas usando la lista de partes antes de empezar el

ensamblaje. Ponga la sillón sobre una superﬁcie protegida para evitar rayar los componentes al ensamblarlo.

Nota: Las ruedas que vienen con este sillón han sido diseñadas para pisos alfombrados. No es recomendable

su uso en pisos de cerámica o madera. Estas ruedas pueden causar daños en la superﬁcie de los pisos de

cerámica o madera, por lo que le sugerimos que coloque un tapete debajo del sillón para proteger el piso.

Estamos aquí para ayudarle con cualquier pregunta, comentario, o necesidad de partes de

repuesto de garantía.

Visítanos en : www.truecustomersupport.com

Por favor llámenos a nuestro número gratuito : 1-855-372-2315

(Lunes-Viernes 6:00 am - 5:00 pm Horario Oﬁcial del Pacíﬁco).

Summary of content (11 pages)

PAGE 1
Chair Assembly Instructions Carefully unpack all parts and identify them against the parts list before attempting to assemble. To avoid scratching the components, assemble the chair on a protected surface. Note: The casters sold with this chair are intended for use on carpet and not recommended for use on tile or hard wood floors. Using these casters on tile or wood flooring may cause floor surface damage, so please consider purchasing a chairmat to protect your floor surfaces.
PAGE 2
Parts/Partes A1 A2 Casters Ruedas Footers Pies Quantity/cantidad: 5 Quantity/cantidad: 5 D Seat Plate Mecanismo del asiento Quantity/cantidad: 1 B Star Base Base en forma de estrella Quantity/cantidad: 1 E Seat Cushion and Back Cushion Cojín del asiento y cojín del respaldo Quantity/cantidad: 1 C Gas Lift Elevador neumático Quantity/cantidad: 1 F 1” Screws Tornillos de 25mm Quantity/cantidad: 4 G Allen Key Llave allen Quantity/cantidad: 1 3
PAGE 3
Step 1 Place the Star Base (B) upside down and insert 5 Casters (A1) or Footers (A2) into the holes on the Star Base (B). Paso 1 Ponga la base en forma de estrella (B) con las patas hacia arriba e inserte las 5 ruedas (A1) o pies (A2) en los hoyos situados en la base (B). A1 B A2 B Step 2 Turn the Star Base (B) over and insert the Gas Lift (C) through the center hole on top of Star Base (B).
PAGE 4
Step 3 Attach Seat Plate (D) to the bottom of the Seat Cushion (E) (with the front of the seat plate facing the front of seat cushion). Attach by using 1” Screws (F) for the holes of the Seat Plate (D) with the Allen Key (G). *Note: Align the Seat Plate so the FRONT on the seat plate matches the FRONT label on the bottom of the seat cushion. Tighten the screws completely.
PAGE 5
Step 4 Position the assembled chair upright with the seat plate facing down. Insert the Gas Lift (C) into the center hole of the Seat Plate (D). E Paso 4 Coloque la silla ensamblada verticalmente, con la plancha del asiento hacia abajo. Inserte el elevador neumático (C) en el hoyo central de la mecanismo del asiento (D).
PAGE 6
Operating Instructions Instrucciones de Uso Function Instruction - 1 To Adjust Seat Height: While seated, lean forward and reach under the right side of the chair to find the handle. Lift the handle and raise your body up slightly to allow the chair to rise to the desired height. Once desired height is reached, release handle to lock chair at desired height. To lower the seat, lift the handle while seated. The chair will descend until the handle is released or the chair reaches the bottom position.
PAGE 7
Function Instruction - 2 To Operate Tilt Lockout: While seated, reach under the right side of the chair to find the height adjustment handle. Pull the handle all the way out (away from the seat plate) to allow the chair to tilt backwards. To lock the chair in the upright or vertical position, sit upright and push the handle in towards the seat plate.
PAGE 8
Function Instruction - 3 To Adjust Tension On The Tilt: Reach under the front center of the chair, grasp the round knob (R) and turn it counter - clockwise to stiffen the tilt mechanism for a heavier user. Turn the knob (R) clockwise to loosen the tilt mechanism for a lighter user. Rotate the knob (R) until the desired resistance is reached.
PAGE 9
Limited Warranty True Innovations seating products are warranted against defects in material and workmanship while owned by the “Original Purchaser”. The term “Original Purchaser” is defined as that party or entity which purchases True Innovations furniture from an authorized True Innovations retailer as shown by the original sales receipt. This warranty does not apply to “as is” or previously owned seating products.
PAGE 10
Garantía Limitada Los productos de True Innovations seating están garantizados contra defectos de material y mano de obra mientras está en posesión de su “Comprador Original”. El término “Comprador Original” se define como el individuo o entidad que compra el mueble de True Innovations de un distribuidor autorizado así demostrado por el recibo original. Esta garantía no le aplica a muebles usados comprados “como tales”.
PAGE 11