User Manual
Setup
9
selected above. The possible options are:
• WEP - If selected, you must enter the WEP data shown
below. This WEP data must match the Access Point or other
Wireless stations.
• AES, TKIP - These options are available with WPA and
WPA-PSK. Select the correct option.
WPA Preshared Key This is for WPA-PSK only.
If using WPA-PSK Enter the PSK (Pre-shared Key), sometimes
called the network key. All Wireless stations must use the same
key.
WEP Key This section is grayed out unless using WEP.
• Key # - You can enter up to 4 keys.
Use the radio button to select the Default key (used for
transmissions.) You must enter the default key; the other
keys are optional.
• Hex/ASCII - Select the method of entering the key value.
(Note: Hex chars are 0~9 and A~F.)
• Enter the key value or values you wish to use. These must
match the Access Point or other wireless stations. The De-
fault Key is required, the others are optional.