User's Guide
Table Of Contents
- GM01Q-STMOD Test Kit User Guide
- Preface
- About this Manual
- GM01Q-STMOD Test Kit Presentation
- Getting Started
- Setup and Troubleshooting
- Regulatory Statements
- Glossary and Abbreviations
GM01Q-STMOD TEST KIT USER MANUAL PROPRIETARY 1
SEQUANS Communications
1
GM01Q-STMOD Test Kit
Presentation
1.1 Test Kit Environment
The requirement environment to run tests is as follows:
• One GM01Q-STMOD board (included in GM01Q-STMOD Test Kit)
• One STM32 Discovery™ Board (not included in GM01Q-STMOD Test Kit).
You can use your existing Discovery Board or buy one from
https://www.st.com/en/evaluation-tools/stm32-mcu-discovery-kits.html
• One mini USB cable (not included in GM01Q-STMOD Test Kit)
• One antenna (included in GM01Q-STMOD Test Kit)
•The GM01Q-STMOD Test Kit requires a Serial Terminal Emulator running
under Windows, required to interact with the Test Kit through AT
Commands. In the example used in this document we use TeraTerm soft-
ware (see https://osdn.net/projects/ttssh2/releases/ or other reliable down-
load sources).
Rev4 Draft