Installation guide

Appendix A RFID Device Adapter Reference 149
Additional Properties Information for Alien
Reader
■ readerepcANT0, readerepcANT1 – This property overrides the value
specified by the readerepc property for this particular antenna. (The
readerepc property applies to the entire system as long as an EPC has not been
specified for a particular antenna.) This property enables the events from two or
more antennae from a single reader to be handled by two or more separate
processing chains of filters and connectors. Setting the EPC identifier for the
antenna tells the RFID Event Manager to discriminate between the antennae if
they are enabled, but enabling the antenna is done through the use of the
antennaSequence property.
■ persisttime – This property should not be confused with the functionality
provided by the Smoothing filter. The persisttime property is managed by the
Alien RFID reader, not the RFID Event Manager. Refer to the Alien Reader
documentation.
Adapter for ThingMagic Mercury 3 and
Sensormatic SensorID Agile 1 Readers
This adapter communicates with the ThingMagic Mercury 3 and the Sensormatic
SensorID Agile 1 RFID Reader. The adapter properties are shown in the following
table.
TABLE A-7 Adapter Properties for the Mercury 3 and Agile 1 Readers
Name Description Values
Name Unique name identifying
this adapter.
Sample value = ThingMagicReader
classname Java class name. com.sun.autoid.adapter.tyco.Merc
ury3Adapter
Common Properties
See TABLE 2-4 for general description and values
LogLevel
hostname Must be configured with a static IP
address, or to boot from DHCP and
obtain the IP address specified in this
property.
port default = port 80