Specifications
30 Video Multiplexer with Video Motion Detection
SETUP MODE
Setup mode allows you to customize multiplexer operation to suit
a specific application. To enter the setup mode, press the buttons
required to access system setup menus (see Security Measures in
the front of this manual for instructions). See Chapter 4 Setup
for a description of the setup menu system.
Viewing One Camera
The main monitor can display any live or recorded camera in the
full screen format. It can also display a movable 2x zoom of any
camera.
Main Monitor
Full Screen Press any Camera (116) button when the Call light is not lit.
The multiplexer displays the selected camera full screen. You can
also press the full screen button to switch to the full screen format.
The main monitor displays the last camera selected in this format.
The 2x Zoom Press the Zoom button while viewing full screen to zoom the main
monitor display. The multiplexer displays a 2x zoom picture with
a zoom window insert.
The zoom window contains a one quarter sized view of the current
camera, overlaid with a movable zoom pointer. The pointer marks
the part of the picture on display.
Zoom Control 1. Display the desired camera in the full screen format.
2. Press the Zoom button to display the zoom window.
3. Press the up, down, left and right arrow buttons to move
the zoom pointer. The multiplexer moves the 2x display
accordingly.
To move diagonally, press the up or down arrow button and the
right or left arrow button simultaneously; for example, press the
up arrow button and the left arrow button to move the zoom
window diagonally to the upper left of the display.
The zoom window disappears two seconds after the last button
press to provide a clear view. Press any arrow button to recall it.
To return to the full screen format, press the Zoom button again
or press any Camera button.
The multiplexer remembers the selected camera and the position
of the zoom window between zoom operations.