Specifications
Chapter 2 Front & Rear Panels 7
4. down arrow (2x2) Displays up to four cameras in the 2x2
format. Cameras not already displayed can be sequenced in
the lower right window. This button functions as a down
control in the zoom and setup modes. Press Function+down
arrow to display the MOTION ALARM STATUS TABLE.
5. left arrow (3x3) Displays up to nine cameras in the 3x3
format (9-camera and 16-camera models only). Cameras not
already displayed can be sequenced in the lower right window.
This button functions as a left control in the zoom and setup
modes. Press Function+left arrow to display the ALARM
COUNTER.
6. right arrow (4x4) Displays up to 16 cameras in the 4x4
format (16-camera models only). This button functions as a
right control in the zoom and setup modes. Press
Function+right arrow to toggle the time/date display.
7. Live Displays the camera inputs in the selected format. It
also turns on a row of motion targets in motion detection
setup.
8. Tape Selects the VCR input for viewing. During tape
playback, pressing the Tape button displays recorded video
in the selected format. During tape recording, this button
permits monitoring images sent to the VCR. This button
also turns off a row of motion targets during motion detection
setup.
9. Sequence Starts automatic switching of cameras in the
lower right corner of the screen (except in the full screen mode
when it sequences full screen images). It also turns on all
motion targets during motion detection setup.
10. Call Used before pressing a Camera (116) button to
select a camera for full screen display on the call monitor.
This button also turns off all targets in motion detection setup.
11. Camera (116) Used to display cameras in the full screen
format. Used with the Call button to select a camera for full-
screen display on the call monitor. During motion detection
setup each Camera button turns the corresponding motion
target on the cursor line either off or on.