Operating instructions

Intellex RMS Digital Video Management System
Live Operation 51
REVIEWING UNIT STATUS
At any time, you can review unit and camera status. When you click the Status
button, the Status screen appears. The information on this screen reflects the camera
schedule settings as well as the general unit configuration settings.
NOTE: You can change a column’s width by dragging the line between column
headers to the right or the left. The unit does not save the column width
settings when you access this screen again.
Status Lists the connection and recording status for each camera.
The first icon indicates if the camera is connected to the
unit. If an ‘X’ is displayed over an icon, the camera is not
connected.
The second icon indicates if the camera is being recorded. If
an ‘X’ is displayed over an icon, the camera is not being
recorded. The REC indicator on the front panel and the
Record indicator on the main screen are lit when the unit is
recording at least one camera.
If a yellow lock is displayed over the camera icon, you do
not have access to this camera.
Camera Lists the name for each camera, sorted by camera number
(1–8). Camera names are configured in the Cameras
portion of the Setup Options screen.
Quality Lists the current record quality setting (Super, Normal or
Extended Record) for each camera. Quality settings are
configured in the Schedule portion of the Setup Options
screen.
Sensitivity Lists the current sensitivity setting (High or Normal) for
each camera. Sensitivity settings are configured in the
Schedule portion of the Setup Options screen.
Mode Lists the current operating mode for each camera (Active,
Alarmed, Disabled or Stopped). Schedule mode settings are
configured in the Schedule portion of the Setup Options
screen.
Pre-Alarm Lists the pre-alarm setting for each camera in Alarmed
mode. Pre-alarm settings are configured in the Schedule
portion of the Setup Options screen.
Filter Lists the current filter, which is configured for each camera
in Active or Alarmed mode. Filter settings are configured in
the Schedule portion of the Setup Options screen.