Operating instructions

Intellex RMS Digital Video Management System
Playback Operation 165
1. Display and enhance the image, as required. Click Save. A selection dialog
appears.
2. Use the virtual keyboard (or a physical keyboard) to enter the destination to
which to load the image.
3. Click Yes to save the image to the destination. Click No to cancel the operation
and return to the image enhancement screen.
4. If the destination already contains an image, a message appears. Click Yes to
replace the image on the destination with the displayed image. The unit erases the
old image. Click No to cancel the operation and return to the image enhancement
screen.
Click Close to close the image enhancement screen and return to the playback screen.
Click Help to display online help for this screen.
Image Enhancement Tools
NOTE: Each tool has a specific purpose. Therefore, some tools may not be
appropriate for a particular image. Practice using the tools to learn how they
operate. Click Restore at any time to start over.
Bright/Contrast Tool
Use the brightness and contrast tools to brighten or darken the entire image and/or to
increase or decrease the contrast of light and dark elements in the entire image. Click
the Bright/Contrast button on the Tools screen.
Click OK to close this screen and apply the changes to the image. Click Cancel to
close this screen without making any changes to the image. Click Help to display
online help for this screen.
Brightness Use this slide control to adjust the brightness for the
image.
Move the control to the left to darken the image. Move
it to the right to lighten the image. As you move the
control, the image reflects the changes. The brightness
chart (if displayed) also reflects the changes.
Contrast Use this slide control to adjust the contrast for the
image.
Move the control to the left to decrease image contrast.
Move it to the right to increase image contrast. As you
move the control, the image reflects the changes. The
brightness chart (if displayed) also reflects the
changes.