Operating instructions

Intellex RMS Digital Video Management System
Setup Options 139
DISPLAY OPTION
The Display option allows you to configure how the unit displays live video images.
You must possess the Setup Display privilege to access it (see Security Option on
page 127).
1. From the main screen, click the Setup button. The Setup Options screen appears.
2. Click the Display button. The Mode screen (the first Display Setup screen)
appears.
Mode Tab
Use the Mode tab to select the live video monitor and the sequencer dwell time.
Sequencer Dwell Use this option to set the amount of time the unit
displays a camera’s images before switching to the next
camera. This setting is used with camera sequencing (see
Camera Sequencing on page 48). The setting can range
from one second (00:01) to two minutes (02:00). The
default is two seconds (00:02).
Lock Live/Playback
Layout
Yes Select to keep the assignment of cameras
made in Playback mode when exiting to
Live display mode.
No Select to revert to the last camera
assignment made in Live display mode
when exiting Playback mode. The default is
No (locking disabled).
The last camera assignments made in Live
display mode are always kept when going
to Playback mode.
Playback to Monitor Yes Select to send Playback to the composite
video output. This output can be used for
recording video onto a video tape recorder
and is in full-screen mode with the same
overlay information enabled by Playback
Overlay: unit name, camera name, date,
time and alarm input.
No Select to use the composite video output for
live video display to an optional monitor.