Operating instructions

Installation and Operating Instructions
134 Setup Options
Click OK to accept the displayed record mode options. Click Cancel to cancel the
changes. Click Help to display online help for this screen.
• Move the slide control to the left to decrease the percentage in increments of five.
Select a low percentage to display the warning message when the database has a
lot of available space.
• Move the slide control to the right to increase the percentage in increments of five.
Select a high percentage to display the warning message when the database has
less available space.
Notify when _____% full
When the percentage of images in the image database reaches the setting the operator
chose, the unit flashes the Alarms indicator on the front panel. It also energizes alarm
output 16 if the Message Alert option is selected (see Alarms Option on page 136).
Then it displays a screen (indicating the image database percentage of images).
NOTE: This screen only appears when Linear is selected on the Record Mode
screen.
Select one of the following options and click OK:
Database Full
When the image database is full, the unit stops recording. It flashes the Alarms
indicator on the front panel. It also energizes alarm output 16 if the Message Alert
option is selected (see Alarms Option on page 136).
NOTE: This screen only appears when Linear is selected on the Record Mode
screen.
Halt when database is
full
Select this option to halt image recording when the
image database is full. You must click the Begin
Record button on the Utility Options screen to start
recording again (see Utility Options on page 53).
Notify me again when
90% full
Select this option to clear the notification screen. The
unit displays another notification screen when the
database becomes 90% full. This option is disabled
when the image database is at least 90% full.
Continue at beginning
when full
Select this option to continue recording images from
the beginning of the image database. When the
database becomes full, the unit behaves as if circular
mode is selected, recording over the oldest images.