Operating instructions

Installation and Operating Instructions
102 Setup Options
Active Zone
Settings
(page 103)
NOTE: You can use the default settings for size, speed
and direction by drawing a target area without
specifying size, speed or direction for the object.
The default settings will trigger an alarm for
virtually any
type of motion in the target area. You
can adjust these settings independently of each
other to reduce the number of objects that trigger
alarms.
Size Defines the minimum size of the object in
the target area. Anything larger than the
defined area triggers an alarm.
Speed Defines the slowest speed of the object
passing through the target area. Anything
faster than this speed triggers an alarm. The
default speed is no movement.
Direction Defines the direction of the object passing
through the target area. When an arrow is
green, the indicated direction is enabled.
When an arrow is grayed out, the indicated
direction is disabled. The default direction
is all directions enabled.
Delete Removes the Active Zone (i.e., the selected
target area with scrolling borders).
Default Completely resets all the default settings
(size, speed, and direction) for the Active
Zone.
Motion Exception Displays the image from the selected camera.
Te s t Allows you to test the current filter settings
(see Test ing on page 104).
Apply Click to apply the changes made.
Cancel Click to cancel the changes made.
Help Click to display online help for this screen.