Instruction manual - XS Wireless 1 & XS Wireless 2

EM-XSW 2 rack receiver
68
▷ Press the UP or DOWN button to select a frequency bank.
▷ Press the SET button to start the frequency scan in the se-
lected bank.
The next free frequency is shown on the display.
▷ Press the SET button to accept the displayed frequency.
or
▷ Press the UP or DOWN button to display the next free fre-
quency.
or
▷ Press the ON/OFF (ESC) button to cancel the scan.
The previous frequency remains unchanged.
If you have set a new frequency, you must still syn-
chronize the receiver with the transmitter to es-
tablish the radio link (see „Establishing a radio link
| Synchronizing the receiver and transmitter“).
PRESET menu item
Under the PRESET menu item, you can set the radio frequency
by selecting a preset channel.
If you are not sure whether the selected frequency
is free, we recommend performing a scan to detect
all free frequencies: „SCAN menu item“.
▷ Press the UP or DOWN button until the PRESET menu item
appears in the display.
▷ Press the SET button to open the menu item.