user manual
Table Of Contents
- Safety instructions
- Intended use of the system
- Operating the EZL 2020-20 L charging case
- Servicing
- Symbols on adhesive labels attached to the EZL 2020-20 L charging case
- Attention! High Volume!
- Safety instructions for Li-poly and NiMH rechargeable batteries and batteries
- Additional safety instructions for the BA 2015 accupack and for batteries
- System components
- Overview of the system
- The operating controls
- SK 2020 D bodypack transmitter
- HDE 2020 D stethoset receiver
- EZL 2020-20 L charging case
- Indications and displays on the transmitter
- Indications and displays on the receiver
- Indications and displays on the charging case
- The functions of the transmitter operating controls
- The functions of the receiver operating controls
- The functions of the operating controls of the charging case
- Putting the components into operation
- Using the components
- The operating menu of the transmitter
- Care and maintenance
- If problems occur...
- Specifications
- Accessoires
- Manufacturer declarations
46
EZL 2020-20 L charging case (Cat. No. 500542)
The devices comply with the following standards:
Frequency range 863–865 MHz, approved in:
A, B, BG, CH, CY, CZ, D, DK, E, EST, F, FIN, FL, GB, GR, H, HR, I, IRL, IS, L, LT, LV, M, N, NL, P, PL, S,
SK, SLO, TR.
Ambient temperature during charging 0–40 °C
Mains voltage 100–240 VAC (50/60 Hz)
Primary power consumption max. 70 W
Charging voltage for HDE 2020 4.7–5.5 V
Charging current per
charging compartment for HDE 2020
typ. 400 mA
Charging time HDE 2020 approx. 2.5 hrs
Charging voltage for SK 2020 / BA 2015 typ. 2.0–3.4 V
Charging current per
charging compartment for
SK 2020 / BA 2015
typ. 500 mA
Charging time SK 2020 / BA 2015 approx. 3.5 hrs
Overload threshold for SK 2020 / BA 2015 typ. 3.9 V
Dimensions approx. 600 x 270 x 380 mm
Weight (empty) approx. 8300 g
Radio: ETSI EN 301357-1/-2, class 1
EMC: ETSI EN 301489-1/-9, EN 55103-1/-2
Safety: EN 60065