user manual
Table Of Contents
- Safety instructions
- Intended use of the system
- Operating the EZL 2020-20 L charging case
- Servicing
- Symbols on adhesive labels attached to the EZL 2020-20 L charging case
- Attention! High Volume!
- Safety instructions for Li-poly and NiMH rechargeable batteries and batteries
- Additional safety instructions for the BA 2015 accupack and for batteries
- System components
- Overview of the system
- The operating controls
- SK 2020 D bodypack transmitter
- HDE 2020 D stethoset receiver
- EZL 2020-20 L charging case
- Indications and displays on the transmitter
- Indications and displays on the receiver
- Indications and displays on the charging case
- The functions of the transmitter operating controls
- The functions of the receiver operating controls
- The functions of the operating controls of the charging case
- Putting the components into operation
- Using the components
- The operating menu of the transmitter
- Care and maintenance
- If problems occur...
- Specifications
- Accessoires
- Manufacturer declarations
24
Connecting external audio sources
You can connect an external audio source such as a CD
player, MP3 player, tape player, etc. to the transmitter.
(Please note that you cannot connect a second
microphone.) Both signals – the microphone input
signal and the line input signal – are mixed together
equally in the transmitter.
Connect the line output of the external audio
source to the transmitter’s line input .
Lock the plug by screwing down the coupling ring.
Switch the line input on as described on page 33.
Adjust the sensitivity of the line input as described
on page 34.
Attaching the transmitter to clothing
The transmitter is attached to clothing (e.g. belt,
waistband) with the supplied belt clip .
The clip is detachable so that you can also attach the
transmitter with the antenna pointing downwards. To
do so, withdraw the clip from its fixing points and
attach it the other way round.