User's Manual

SPB 8000|11
Connecting the SPB 8000 to a computer
Adjusting presets
왘 Select a preset (1–4).
왘 Adjust the preset according to your needs. An explanation of the settings can be found
on the following pages.
왘 Click on “Adapt”.
The preset is stored in the SPB 8000.
Resetting preset settings
As long as you do not click on “Adapt”, you can reset the preset settings to the last stored
value at any time:
왘 Click on “Cancel”.
To reset all presets to the factory default settings:
왘 Click on “Reset” and follow the instructions in the web interface.
Calling up presets
You can call up the presets via the web interface or directly on the SPB 8000. In order to call
up the presets on the SPB 8000, no connection to a computer is required.
왘 Press one of the Presets buttons 1–4 6.
The configuration software remote controls the SPB 8000 in real time. All settings
made here directly affect the SPB 8000. If you select a preset in the configuration
software, this is called up in the SPB 8000.