Instruction manual SpeechLine Digital Wireless
Table Of Contents
- SpeechLine Digital Wireless: System Information
- Focus on the spoken word
- The Products of the SpeechLine Digital Wireless Series
- Accessories
- SpeechLine Digital Wireless: System planning
- Planning
- Recommendations on antenna mounting
- Antenna setup and planning for SpeechLine Digital Wireless
- Antenna mounting options
- Option 1: Connecting the AWM 2 or AWM 4 antenna wall mount directly to the receiver(s)
- Option 2: Combining multiple links to one AWM 2/AWM 4
- Option 3: Rack mounting - front
- Option 4: Rack mounting - rear
- Further important information on antenna usage
- Multi-room mode
- SpeechLine Digital Wireless: Instruction manual
- SL Rack Receiver DW
- Product overview and operating elements – front panel
- Product overview and connections – rear panel
- Connecting the receiver
- Controlling and monitoring the receiver via the network
- Updating the firmware
- Setting up the receiver
- Installing receivers in a rack
- Displays on the receiver’s display panel
- Using the operating menu of the receiver
- SL MCR DW
- The SL Handheld DW
- The SL Bodypack DW
- The SL Tablestand 133-S DW
- The SL Tablestand 153-S DW
- The SL Boundary 114-S DW
- Pairing
- Performing a walk test (reception quality)
- The SL Headmic 1 headset microphone
- The MKE 1 clip-on microphone
- The CHG 2 charger
- The CHG 4N charger
- The CHG 2W charging base
- The AWM 2 antenna wall mount
- The AWM 4 antenna wall mount
- The SL PASC 2 passive antenna splitter/ combiner
- The SL PASC 4 passive antenna splitter/ combiner
SL Rack Receiver DW
83
5 6-step display for the RF signal level
• Displays the current level of the RF signal
6 RF output power of the transmitter, indicating master or fol-
lower
• Displays the RF output power of the received transmitter.
• Indicates whether the device is a master or a follower:
The device is the master.
The device is a follower.
The device is a follower, but is not synchronized.
The synchronization status is unknown.
7 Lock mode
•The lock mode function is activated. The lock
mode is currently deactivated and the receiver can
be operated.
•The lock mode function is activated. The lock
mode is currently activated. Long-press the jog
dial to temporarily deactivate the lock mode.
• If no padlock icon is displayed, the lock mode function is
deactivated.
• See „The System Settings menu“.
8 Name of the radio link
• The name of the radio link can be configured freely. See
„The Device Identification menu“.
9 Expected remaining battery life of the received transmitter
• Displays the remaining battery life of the received trans-
mitter in hours (only when the original Sennheiser BA 10,
BA 30 and BA 40 accupacks are used).
• The remaining battery life is not displayed when batteries
or rechargeable AA size batteries are used.
107-step display of the accupack or battery capacity
• Graphically displays the current charge status of the ac-
cupack or the batteries.
►