Instruction manual SpeechLine Digital Wireless

SL Rack Receiver DW
74
Setting up the receiver
This sections describes how to set up the receiver.
You can also install the receiver in a fixed location, e.g. in a 19"
rack. You can find more information about installing the re-
ceiver in a fixed location under: „Installing receivers in a rack“.
Affixing the device feet
Only affix the device feet if you are setting the receiver up in
the stand-alone position instead of installing it in a 19" rack.
The device feet will get in the way if the receiver is installed in
a rack.
To affix the device feet:
▷ Clean the recesses for the device feet at the base of the re-
ceiver.
▷ Affix the device feet to the recesses of the receiver.
▷ Place the receiver on a flat, horizontal surface.
The device feet will adhere reliably to the receiver only after
some time. Avoid moving the receiver during this time.
ATTENTION
Risk of staining furniture surfaces
The device feet my leave stains if they come into contact with
furniture.
▷ Do not place the receiver on delicate surfaces.
Attaching the mounting angles
The mounting angles are designed to help protect the operat-
ing elements from damage or deformation, e.g. if the receiver
is dropped. We therefore recommend always attaching the
mounting angles, even if you do not want to mount the receiver
into a rack.
To fasten the mounting angles:
▷ Unscrew and remove the two recessed head screws on
each side of the receiver.
▷ Secure the mounting angles to the sides of the receiver us-
ing the previously removed recessed head screws.