Instruction manual SpeechLine Digital Wireless
Table Of Contents
- SpeechLine Digital Wireless: System Information
- Focus on the spoken word
- The Products of the SpeechLine Digital Wireless Series
- Accessories
- SpeechLine Digital Wireless: System planning
- Planning
- Recommendations on antenna mounting
- Antenna setup and planning for SpeechLine Digital Wireless
- Antenna mounting options
- Option 1: Connecting the AWM 2 or AWM 4 antenna wall mount directly to the receiver(s)
- Option 2: Combining multiple links to one AWM 2/AWM 4
- Option 3: Rack mounting - front
- Option 4: Rack mounting - rear
- Further important information on antenna usage
- Multi-room mode
- SpeechLine Digital Wireless: Instruction manual
- SL Rack Receiver DW
- Product overview and operating elements – front panel
- Product overview and connections – rear panel
- Connecting the receiver
- Controlling and monitoring the receiver via the network
- Updating the firmware
- Setting up the receiver
- Installing receivers in a rack
- Displays on the receiver’s display panel
- Using the operating menu of the receiver
- SL MCR DW
- The SL Handheld DW
- The SL Bodypack DW
- The SL Tablestand 133-S DW
- The SL Tablestand 153-S DW
- The SL Boundary 114-S DW
- Pairing
- Performing a walk test (reception quality)
- The SL Headmic 1 headset microphone
- The MKE 1 clip-on microphone
- The CHG 2 charger
- The CHG 4N charger
- The CHG 2W charging base
- The AWM 2 antenna wall mount
- The AWM 4 antenna wall mount
- The SL PASC 2 passive antenna splitter/ combiner
- The SL PASC 4 passive antenna splitter/ combiner
Pairing
158
Identifying paired devices
You can perform a pairing identification to see which transmit-
ter is paired with which receiver.
With the SL Rack Receiver DW, you can perform pairing iden-
tification on the device or in the Control Cockpit.
With the SL MCR DW, you can only perform the pairing iden-
tification in the Control Cockpit.
The SL Rack Receiver DW
▷ Short-press the PAIR button of the receiver or of the trans-
mitter.
or
▷ Press the Find button of the desired device from the device
list in the Control Cockpit.
►
• Identify appears on the display panel of the receiver.
• The message This is
Name
appears on the transmitter's
display (only SL Handheld DW and SL Bodypack DW).
• The status LEDs of the paired devices flash green for 10
seconds.
• The device's icon in the Control Cockpit flashes for 10 sec-
onds.
• The display returns to the standard display after 10 sec-
onds.