User's Manual
SL Rack Receiver DW
72
Display Brightness
• Level: Slider for adjusting the display brightness.
Mute Mode
• Switch activated: The MUTE switch of the paired transmitter is activat-
ed and can be used.
• Switch deactivated: The MUTE switch of the paired transmitter is deac-
tivated and cannot be used. The receiver continuously outputs audio
signals.
• Push to talk: Press and hold the MUTE switch of the paired transmitter
to activate the audio signal (for SL Boundary 114-S DW and SL Table-
stand 133/153-S DW only).
• Push to mute: Press and hold the MUTE switch of the paired transmitter
to mute the audio signal (for SL Boundary 114-S DW and SL Tablestand
133/153-S DW only).
Auto Lock
• On: The automatic lock mode is activated. If no button is actuated on the
receiver for approx. 10 seconds, the lock mode is automatically activat-
ed.
• Long-press the jog dial to temporarily deactivate the lock mode.
• Off: The automatic lock mode is deactivated.
RF Power
• Automatic: The transmission power is automatically adjusted.
• Level 1 ... 5: The transmission power can be manually reduced in 5 steps.
This function is required for operation in Multi-Room Mode.
Walk Test
• Starts the walk test. See „Performing a walk test (reception quality)“
Factory Reset
• Yes: All settings are reset to the factory defaults.
• No: The settings are retained.
System Info
• Displays the serial number and the current firmware version of the re-
ceiver.