Users Manual
Table Of Contents
- Digital_9000_Manual_06_2017_EN
- Important safety instructions
- Digital 9000 – System overview
- Delivery includes
- EM 9046 receiver
- EM 9046 CAB cable set
- Antennas and antenna boosters
- GZL 9000 antenna cables
- SKM 9000/SKM 9000 COM radio microphone
- Microphone heads for the SKM 9000 radio microphone
- SK 9000 bodypack transmitter
- Microphones for the SK 9000 bodypack transmitter
- KA 9000 COM command adapter for the SK 9000 bodypack transmitter
- CI 1-4 line/instrument cable for the SK 9000 bodypack transmitter
- B 60/B 61 battery packs
- BA 60/BA 61 accupack
- L 60 charger
- Product overview
- EM 9046 receiver
- Antennas and antenna boosters
- GZL 9000 antenna cable
- SKM 9000/SKM 9000 COM radio microphone
- SK 9000 bodypack transmitter
- KA 9000 COM command adapter for the SK 9000 bodypack transmitter
- BA 60 accupack
- BA 61 accupack
- B 60 battery pack
- B 61 battery pack
- L 60 charger
- Preparing the EM 9046 receiver for use
- Preparing the A/AB/AD 9000 antennas and/or antenna boosters for use
- Preparing the SKM 9000 radio microphone for use
- Preparing the SK 9000 bodypack transmitter for use
- Preparing the L 60 charger for use
- Cascading several chargers
- Setting up or mounting the charger
- Preparing the Digital 9000 system for use
- Using the EM 9046
- Using the SKM 9000
- Using the SK 9000
- Using the L 60
- Cleaning and maintaining the Digital 9000 system
- If a problem occurs ...
- Specifications
Digital 9000 | 57
Using the EM 9046
왘 Turn the jog dial G unti
l the text “start scan” at the bottom margin of
the screen is highlighted in blue:
왘 Start the frequency scan by pressing the jog dial G.
Please note: All audio outputs will be muted!
The interference levels received by the antennas are recorded and dis-
played. The interference levels are divided into four interference zones:
“HD”, “HD/LR”, “LR/HD” and “LR”. The lower the zone, the lower the
received interference level.
In addition, the number of unused frequency presets is displayed per
booster frequency range and per interference zone. The number of unused
frequency presets depends on the number, the height and the frequency
of the received interference levels.
The duration of the frequency scan depends on the number of the
built-in EM 9046 DRX receiver modules. The more modules you use,
the faster the frequency scan is performed.
start full scan
Start fullscan
B8B7B6B5B4B3B2B1
Start scan
RF IN A B
active
630 654
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
654 678 670 694 694 718 710 734 734 758 750 774 774 798 MHz
HD
Noise Level Zone
LR/HDHD/LR LR
Start scan
Start frequency scan
freq scan
start full scan
please select booster range
B8B7B6B5B4B3B2B1
RF IN A B
active
630 654 654 678 670 694 694 718 710 734 734 758 750 774 774 798 MHz
Start scan
HD
Noise Level Zone
LR/HDHD/LR LR
40
40
40
40
40
40
40
35
40
40
35
27
40
40
40
36
40
40
40
29
40
40
40
6
38
37
37
26
34
32
32
31
Interference
levels of
antenna A
Interference
levels of
antenna B
Number of unused
frequency presets
Activated booster
frequency range
Booster
frequency
range B1 ... B8
Interference
zone LR
Interference
zone LR/HD
Interference
zone HD/LR
Interference
zone HD
2011-11-01 13:48:38
freq scan