Manualshelf

Operation Manual

ManualsBrandsSennheiser ManualsAudioS1 DIGITAL
11121314151617181920
Putting the S1 DIGITAL into operation
12 | S1 DIGITAL
Connecting the headset to a Bluetooth device
The headset complies with the Bluetooth 2.1 standard. In order that data can be
transmitted wirelessly using Bluetooth technology, you have to pair your
headset with a Bluetooth device.
The headset can save the connection profiles of up to eight Bluetooth devices
with which it has been paired. After switch-on, the headset automatically tries to
connect to the last connected Bluetooth device.
If you pair the headset with a ninth Bluetooth device, the saved connection
profile of the first Bluetooth device will be overwritten. If you want to re-estab-
lish a connection with the first Bluetooth device, you have to pair the headset
with this Bluetooth device again.
CAUTION
Danger of malfunction due to radio waves!
The transmitted radio waves of mobile phones can impair the operation of
sensitive and unprotected devices.
왘 Only make calls with the headset in environments where wireless Bluetooth
transmission is permitted.
왘 If your audio source does not have a Bluetooth inter-
face, use an optional dongle (see page 30).