Product brochure SpeechLine Wired

Specification MEB 102 MEB 104-L MAS 133
Connector Terminal block 5-pin Mic in : XLR-3F
Mic out : XLR-3M
Pin assignment : 1 = gnd,
2 = +, 3 = −
Switch in : XLR-5F
Connector : 1 = gnd,
2 = Switch, 3 = LED red −,
4 = LED green −,
5 = LEDs +12 V out
Current consumption 4.5 mA
Dimensions H  : 83 mm (12 mm above surface)
Ø  : 28.5 mm
H  : 90 mm (19 mm above surface)
Ø  : 28.5 mm
14.4 x 7.63 x 3.15 cm
(W x D x H)
Dynamic range 104 dB(A) 97 dB(A)
Equivalent noise level 21 dB(A) 28 dB(A)
Equivalent noise level
weighted as per CCIR 468-3
31 dB (CCIR) 38 dB (CCIR)
Frequency response 40 Hz – 20 kHz 40 Hz – 20 kHz
Phantom powering P 24 - P 48 P 24 - P 48 P 48
Pick-up pattern omni-directional cardioid
Sensitivity
16 mV / Pa 14 mV / Pa
Transducer principle pre-polarized condenser
microphone
pre-polarized condenser
microphone
Weight 58 g 60 g 212 g
Operating temperature −10 °C - +50 °C
Output voltage
High level : > 2.4 V
Low level : < 0.4 V
Speechline wired
microphones
Specification MEB 114 MEB 114-S MAS 1
Colour LED light ring : red / green
Connector tiny XLR-3Pin assignment Terminal block 5-pin XLR-5M out Pin assignment
Current consumption 1.5 mA 5.3 mA LED ring : 3 mA
Dimensions 85 x 100 x 25 mm
(W x D x H)
85 x 100 x 25 mm
(W x D x H)
H : 81 mm (8 mm above surface)
Ø : 28.5 mm
Dynamic range 111 dB(A) 111 dB(A)
Equivalent noise level 29 dB(A) 29 dB(A)
Equivalent noise level
weighted as per CCIR 468-3
39 dB (CCIR) 39 dB (CCIR)
Frequency response 40 Hz – 20 kHz 40 Hz – 20 kHz
Phantom powering P 24 - P 48 P 24 - P 48 12 V (1.5 mA max.)
Pick-up pattern cardioid cardioid
Sensitivity
10 mV / Pa 10 mV / Pa
Transducer principle pre-polarized condenser
microphone
pre-polarized condenser
microphone
Weight 291 g 291 g (w/o cable) 60 g
Speechline wired
microphones
Presentation