User Manual

16 | M2 IEBT

Getting started

Pairing the headphones with a Bluetooth device

Ensure that the headphones are within the 20 cm range of your smartphone

when performing this procedure.

1. Switch the headphones on (see page 18).

– If you pair the headphones to the device for the first time, they automatically

go to pairing mode.

– If the headphones don’t automatically go to pairing mode, switch the

headphones off and press the power button again for 4 seconds or until

you hear the voice prompt “power on” and a beep sound.

The LED flashes blue and red. The headphones are in pairing mode.

At this point, if you decide to cancel pairing, press the play/pause button

once. The headphones go to idle mode.

2. Activate Bluetooth on your smartphone.

3. On your smartphone, start a search for Bluetooth devices.

All active Bluetooth devices in the proximity of your smartphone are

displayed.

4. From the list of found Bluetooth devices, select “*** M2 IEBT”. If necessary,

enter the default PIN code “0000”.

If pairing was successful, the neckband vibrates and you hear the voice

prompt “connected”. The LED flashes blue 3 times.

1s 1s

20 cm

› power on ‹

Add Device

Bluetooth on

Bluetooth off

*** M2 IEBT

Keyword: 0000

› connected ‹

2 3

If no connection is established within 5 minutes, pairing mode is terminated

and the headphones switch off. If necessary, repeat the pairing procedure.