Sound Control Protocol - EW-DX EM 2 (Firmware 1.1.3)
Table Of Contents
- 1. Introduction
- 2. Open Sound Control Overview
- 3. Conventions
- 4. SSC Data Structure Specification
- 5. SSC subscriptions - /osc/state/subscribe
- 6. SSC Transport Layer Adaptations
- 7. Developer’s Guide for EW-DX EM 2
- 8. SSC Method List (EW-DX EM 2)
- 8.1 /device/identification/visual
- 8.2 /device/identity/version
- 8.3 /device/identity/vendor
- 8.4 /device/identity/serial
- 8.5 /device/identity/product
- 8.6 /device/network/ether/macs
- 8.7 /device/network/ether/interfaces
- 8.8 /device/network/ipv4/manual_netmask
- 8.9 /device/network/ipv4/manual_ipaddr
- 8.10 /device/network/ipv4/manual_gateway
- 8.11 /device/network/ipv4/netmask
- 8.12 /device/network/ipv4/ipaddr
- 8.13 /device/network/ipv4/interfaces
- 8.14 /device/network/ipv4/gateway
- 8.15 /device/network/ipv4/auto
- 8.16 /device/network/mdns
- 8.17 /device/timeprecision
- 8.18 /device/time
- 8.19 /device/preset_spacing
- 8.20 /device/restore
- 8.21 /device/restart
- 8.22 /device/name
- 8.23 /device/location
- 8.24 /device/link_density_mode
- 8.25 /device/language
- 8.26 /device/frequency_ranges
- 8.27 /device/frequency_code
- 8.28 /device/encryption
- 8.29 /interface/version
- 8.30 /osc/state/auth/access
- 8.31 /osc/state/prettyprint
- 8.32 /osc/state/close
- 8.33 /osc/state/subscribe
- 8.34 /osc/feature/timetag
- 8.35 /osc/feature/baseaddr
- 8.36 /osc/feature/subscription
- 8.37 /osc/feature/pattern
- 8.38 /osc/limits
- 8.39 /osc/schema
- 8.40 /osc/version
- 8.41 /osc/xid
- 8.42 /osc/ping
- 8.43 /osc/error
- 8.44 /rx1/identification/visual
- 8.45 /rx1/presets/user/0
- 8.46 /rx1/presets/active
- 8.47 /rx1/sync_settings/trim_ignore
- 8.48 /rx1/sync_settings/trim
- 8.49 /rx1/sync_settings/name_ignore
- 8.50 /rx1/sync_settings/mute_config_ignore
- 8.51 /rx1/sync_settings/mute_config
- 8.52 /rx1/sync_settings/lowcut_ignore
- 8.53 /rx1/sync_settings/lowcut
- 8.54 /rx1/sync_settings/lock_ignore
- 8.55 /rx1/sync_settings/lock
- 8.56 /rx1/sync_settings/led_ignore
- 8.57 /rx1/sync_settings/led
- 8.58 /rx1/sync_settings/frequency_ignore
- 8.59 /rx1/sync_settings/cable_emulation_ignore
- 8.60 /rx1/sync_settings/cable_emulation
- 8.61 /rx1/warnings
- 8.62 /rx1/name
- 8.63 /rx1/mute
- 8.64 /rx1/mates
- 8.65 /rx1/gain
- 8.66 /rx1/frequency
- 8.67 /rx1/audio
- 8.68 /rx1/restore
- 8.69 /rx2/identification/visual
- 8.70 /rx2/presets/user/0
- 8.71 /rx2/presets/active
- 8.72 /rx2/sync_settings/trim_ignore
- 8.73 /rx2/sync_settings/trim
- 8.74 /rx2/sync_settings/name_ignore
- 8.75 /rx2/sync_settings/mute_config_ignore
- 8.76 /rx2/sync_settings/mute_config
- 8.77 /rx2/sync_settings/lowcut_ignore
- 8.78 /rx2/sync_settings/lowcut
- 8.79 /rx2/sync_settings/lock_ignore
- 8.80 /rx2/sync_settings/lock
- 8.81 /rx2/sync_settings/led_ignore
- 8.82 /rx2/sync_settings/led
- 8.83 /rx2/sync_settings/frequency_ignore
- 8.84 /rx2/sync_settings/cable_emulation_ignore
- 8.85 /rx2/sync_settings/cable_emulation
- 8.86 /rx2/warnings
- 8.87 /rx2/name
- 8.88 /rx2/mute
- 8.89 /rx2/mates
- 8.90 /rx2/gain
- 8.91 /rx2/frequency
- 8.92 /rx2/audio
- 8.93 /rx2/restore
- 8.94 /audio1/out1/level
- 8.95 /audio1/out2/level
- 8.96 /m/rx1/rssi
- 8.97 /m/rx1/rsqi
- 8.98 /m/rx1/divi
- 8.99 /m/rx1/af
- 8.100 /m/rx2/rssi
- 8.101 /m/rx2/rsqi
- 8.102 /m/rx2/divi
- 8.103 /m/rx1/af
- 8.104 /mates/tx1/battery/type
- 8.105 /mates/tx1/battery/lifetime
- 8.106 /mates/tx1/battery/gauge
- 8.107 /mates/tx1/warnings
- 8.108 /mates/tx1/version
- 8.109 /mates/tx1/type
- 8.110 /mates/tx1/trim
- 8.111 /mates/tx1/name
- 8.112 /mates/tx1/mute_config
- 8.113 /mates/tx1/mute
- 8.114 /mates/tx1/lowcut
- 8.115 /mates/tx1/lock
- 8.116 /mates/tx1/led
- 8.117 /mates/tx1/identification
- 8.118 /mates/tx1/capsule
- 8.119 /mates/tx1/cable_emulation
- 8.120 /mates/tx2/battery/type
- 8.121 /mates/tx2/battery/lifetime
- 8.122 /mates/tx2/battery/gauge
- 8.123 /mates/tx2/warnings
- 8.124 /mates/tx2/version
- 8.125 /mates/tx2/type
- 8.126 /mates/tx2/trim
- 8.127 /mates/tx2/name
- 8.128 /mates/tx2/mute_config
- 8.129 /mates/tx2/mute
- 8.130 /mates/tx2/lowcut
- 8.131 /mates/tx2/lock
- 8.132 /mates/tx2/led
- 8.133 /mates/tx2/identification
- 8.134 /mates/tx2/capsule
- 8.135 /mates/tx2/cable_emulation
- 8.136 /mates/active
- 9. SSC Error List (EW-DX EM 2)
SSC Developer‘s guide for EW-DX | 22/57
SSC Method List (EW-DX EM 2)
8.26 /device/frequency_ranges
Command to read receiver device frequency ranges.
Format of replied string array:
["<range_1 start frequency>:<range_1 step>:<range_1 end frequency>",
"<range_2 start frequency>:<range_2 step>:<range_2 end frequency>",...,
"<range_n start frequency>:<range_n step>:<range_n end frequency>"]
• type: Read-only
• value: String
• limits
type: String
const: true
writeable: false
count: -1
Example:
{"device":{"frequency_ranges":
["470000000:25000:514875000","522100000:25000:550000000"]}}
This means: [470MHz..514.875MHz], [522.1MHz..550MHz] step=25kHz
8.27 /device/frequency_code
Command to read receiver device frequency range code.
• type: Read-only
• value: String
• limits
type: String
const: true
writeable: false
Example:
{"device":{"frequency_code":"Q1-9"}}
8.28 /device/encryption
Activate/Deactivate encryption on the device.
• type: Read/Write
• value: Boolean
• limits
type: Boolean
const: false
writeable: true
subscr: true
8.29 /interface/version
Command to read EW-DX SSC interface version.
• type: Read-only
• value: String
• limits
type: String
const: true
writeable: false