Instruction manual ew D1
Table Of Contents
- Contents
- Important safety instructions
- Optimum sound the easy way
- Package contents
- Product overviews
- Putting the products into operation
- Avoiding sources of interference
- Direct line of sight recommended
- Putting the receiver into operation
- Fitting the device feet
- Mounting the rack mount “ears”
- Connecting the rod antennas to the receiver
- Mounting the receiver into a 19" rack
- Mounting a single receiver into a rack
- Mounting the rod antennas to the front of the rack
- Mounting two receivers into a rack
- Connecting the receiver to a mixing console
- Connecting receivers in a network
- Connecting the receiver to the power supply system
- Putting the bodypack transmitter into operation
- Preparing the headset microphone for use
- Attaching the clip-on microphone to clothing
- Putting the handheld transmitter into operation
- Recharging the accupack
- Using the products
- Switching the devices on or off
- Checking the charge status of the batteries or accupacks
- Checking the RF signal level
- Muting the bodypack transmitter or the SKM-S D1 handheld transmitter
- Pairing a receiver with a transmitter
- Identifying paired devices
- Using the devices in multi-channel operation
- Switching between the standard display and the extended standard display
- Using the operating menu of the receiver
- Using the buttons for navigation
- Overview of the operating menu of the receiver
- Changing the name of the radio link
- Activating/deactivating the low-cut filter
- Adjusting the equalizer
- Adjusting the de-esser
- Activating/deactivating the dynamic compression
- Resetting the audio settings
- Coarsely adjusting the output level of the receiver (Mic/Line)
- Fine-tuning the output level of the receiver
- Activating/deactivating the lock mode
- Activating/deactivating the MUTE switch of the transmitter
- Adjusting the display brightness
- Calling up help functions
- Retrieving system information
- Resetting the receiver to the factory default settings
- Changing the network configuration
- Displaying the IPv6 address
- Displaying the MAC address
- Performing a walk test (checking the reception quality)
- Controlling, monitoring or updating devices via the network
- Cleaning and maintaining the products
- If a problem occurs ...
- Specifications
- Accessories
- Manufacturer Declarations
54
Accessories
Accessories
Receiver
• EM D1 rack receiver
incl. NT 2-3 or NT 12-4C power supply unit
incl. GA 4 rack-mount kit
Mounting accessories for the receiver
• GA 4 rack-mount kit
Connection cable
• CI 1 guitar cable
Transmitters
• SK D1 bodypack transmitter
incl. 2 AA size batteries (1.5 V) and B 30 battery box
• SKM D1 handheld transmitter without mute switch
without microphone head
incl. 2 AA size batteries (1.5 V) and B 10 battery box
• SKM-S D1 handheld transmitter with mute switch
without microphone head
incl. 2 AA size batteries (1.5 V) and B 10 battery box
Microphones for the bodypack transmitter
• ME 2-2 clip-on microphone
• ME 3-II headset microphone
Microphone heads for the handheld transmitter
• MMD 835, dynamic, cardioid
• MMD 845, dynamic, super-cardioid
• MMD 935, dynamic, cardioid
• MMD 945, dynamic, super-cardioid
• MMK 965, pre-polarized condenser, super-cardioid
• MMK 965, large diaphragm true condenser microphone with switchable
pick-up pattern (super-cardioid/cardioid)
Windshields
• MZW 1 windshield for the handheld transmitter
Power supply units
• NT 2-3 power supply unit for the receiver
• Interchangeable country adapters for the NT 2-3 power supply unit
• NT 12-4C power supply unit for the receiver
• NT 5-10-U USB power supply/charger for the accupack