Instruction manual ew D1
Table Of Contents
- Contents
- Important safety instructions
- Optimum sound the easy way
- Package contents
- Product overviews
- Putting the products into operation
- Avoiding sources of interference
- Direct line of sight recommended
- Putting the receiver into operation
- Fitting the device feet
- Mounting the rack mount “ears”
- Connecting the rod antennas to the receiver
- Mounting the receiver into a 19" rack
- Mounting a single receiver into a rack
- Mounting the rod antennas to the front of the rack
- Mounting two receivers into a rack
- Connecting the receiver to a mixing console
- Connecting receivers in a network
- Connecting the receiver to the power supply system
- Putting the bodypack transmitter into operation
- Preparing the headset microphone for use
- Attaching the clip-on microphone to clothing
- Putting the handheld transmitter into operation
- Recharging the accupack
- Using the products
- Switching the devices on or off
- Checking the charge status of the batteries or accupacks
- Checking the RF signal level
- Muting the bodypack transmitter or the SKM-S D1 handheld transmitter
- Pairing a receiver with a transmitter
- Identifying paired devices
- Using the devices in multi-channel operation
- Switching between the standard display and the extended standard display
- Using the operating menu of the receiver
- Using the buttons for navigation
- Overview of the operating menu of the receiver
- Changing the name of the radio link
- Activating/deactivating the low-cut filter
- Adjusting the equalizer
- Adjusting the de-esser
- Activating/deactivating the dynamic compression
- Resetting the audio settings
- Coarsely adjusting the output level of the receiver (Mic/Line)
- Fine-tuning the output level of the receiver
- Activating/deactivating the lock mode
- Activating/deactivating the MUTE switch of the transmitter
- Adjusting the display brightness
- Calling up help functions
- Retrieving system information
- Resetting the receiver to the factory default settings
- Changing the network configuration
- Displaying the IPv6 address
- Displaying the MAC address
- Performing a walk test (checking the reception quality)
- Controlling, monitoring or updating devices via the network
- Cleaning and maintaining the products
- If a problem occurs ...
- Specifications
- Accessories
- Manufacturer Declarations
27
Using the products
Switching the handheld transmitter off
왘 Long-press the ON/OFF button in the direction of the transmitter body.
The display panel and the status LED go off.
Checking the charge status of the batteries or
accupacks
When the capacity of the batteries or the accupack is so low that the remain-
ing battery life is less than 30 minutes, the status LED on both the transmitter
and the receiver flashes red.
In addition, the empty battery icon flashes on the display panel of both the
receiver and the transmitter.
Battery status display If you power the transmitter with batteries, a 6-segment battery icon is
shown on the display panel of both the receiver and the transmitter:
Accupack status display If you power the transmitter with the optional accupack, the expected battery
life is shown on the display panel of both the transmitter and the receiver:
Checking the RF signal level
The field strength of the RF signal received by the receiver is shown on the dis-
play panel of both the receiver and the transmitter.
If no RF signal is being received, e.g. because the paired device is switched off
or out of range, all segments of the RF signal level display are grayed out. In
addition, the background of the display panel changes back and forth
between light and dark and No Link appears on the display panel.
LONG = OFF
NAME
EQ
DE-S AGC
NAME
NAME
10 h
EQ
DE-S AGC
NAME
10
h
NAME
8 h
EQ
DE-S AGC
NAME