Instruction manual ew D1
Table Of Contents
- Contents
- Important safety instructions
- Optimum sound the easy way
- Package contents
- Product overviews
- Putting the products into operation
- Avoiding sources of interference
- Direct line of sight recommended
- Putting the receiver into operation
- Fitting the device feet
- Mounting the rack mount “ears”
- Connecting the rod antennas to the receiver
- Mounting the receiver into a 19" rack
- Mounting a single receiver into a rack
- Mounting the rod antennas to the front of the rack
- Mounting two receivers into a rack
- Connecting the receiver to a mixing console
- Connecting receivers in a network
- Connecting the receiver to the power supply system
- Putting the bodypack transmitter into operation
- Preparing the headset microphone for use
- Attaching the clip-on microphone to clothing
- Putting the handheld transmitter into operation
- Recharging the accupack
- Using the products
- Switching the devices on or off
- Checking the charge status of the batteries or accupacks
- Checking the RF signal level
- Muting the bodypack transmitter or the SKM-S D1 handheld transmitter
- Pairing a receiver with a transmitter
- Identifying paired devices
- Using the devices in multi-channel operation
- Switching between the standard display and the extended standard display
- Using the operating menu of the receiver
- Using the buttons for navigation
- Overview of the operating menu of the receiver
- Changing the name of the radio link
- Activating/deactivating the low-cut filter
- Adjusting the equalizer
- Adjusting the de-esser
- Activating/deactivating the dynamic compression
- Resetting the audio settings
- Coarsely adjusting the output level of the receiver (Mic/Line)
- Fine-tuning the output level of the receiver
- Activating/deactivating the lock mode
- Activating/deactivating the MUTE switch of the transmitter
- Adjusting the display brightness
- Calling up help functions
- Retrieving system information
- Resetting the receiver to the factory default settings
- Changing the network configuration
- Displaying the IPv6 address
- Displaying the MAC address
- Performing a walk test (checking the reception quality)
- Controlling, monitoring or updating devices via the network
- Cleaning and maintaining the products
- If a problem occurs ...
- Specifications
- Accessories
- Manufacturer Declarations
41
Using the products
The software displays the receiver information in list form.
If a newer firmware is available, its version number appears in the Latest
Release drop-down list. In addition, the buttons Update All and Update
become active (see the second table row in the above screen shot). If the
firmware is up-to-date, the text Current is shown instead (see the first
table row in the above screen shot).
To update the firmware of all receivers:
왘 Click the Update All button located above the table.
To update the firmware of individual receivers:
왘 Click Update in the corresponding table row.
A progress bar appears on the receiver display panels while the new firm-
ware is being downloaded and transferred to the receivers via the network.
Then Finalising and a new progress bar appear on the receiver display pan-
els while the firmware is being installed. Finally, the receivers restart. The
table displays the new firmware version and the text Current.
Updating the transmitter firmware Once you have updated the firmware of all receivers:
왘 Switch on a transmitter. All other transmitters must be switched off during
the firmware update!
The paired receiver automatically detects the differing firmware version of
the transmitter. A message appears on the receiver display panel prompt-
ing you to update the firmware of the transmitter.
왘 Update the transmitter firmware by selecting OK and then confirming by
pressing the jog dial.
The status LED on both the transmitter and the receiver lights up yellow
and Remote Update appears on the transmitter display panel while the
firmware is being wirelessly transmitted from the receiver to the transmit-
ter and automatically installed.
왘 Wait until the transmitter has restarted and the status LED on both the
transmitter and the receiver lights up green.
The firmware update was successful.
왘 Switch off the transmitter with the updated firmware and repeat the
update procedure with the next transmitter.
If you cannot access the Internet:
왘 Click Browse and navigate to the firmware file you saved.