Instruction manual ew D1

32
Using the products
Changing the name of the radio link
You can change the name of the radio link. This name is displayed on the dis-
play panels of the paired devices.
왘 Select Name.
왘 Select and confirm the character that you want to change. Then select the
new character.
You can enter up to 8 capital letters from A to Z and digits from 0 to 9.
To delete the selected character:
왘 Select DEL and confirm by pressing the jog dial.
To store the entered name:
왘 Select SAVE and confirm by pressing the jog dial.
Activating/deactivating the low-cut filter
You can filter out low-frequency noise caused, for example, by the proximity
effect of the microphone or by wind.
왘 Select Audio Settings – Low Cut.
Adjusting the equalizer
You can adjust a sound profile to e.g. improve speech intelligibility or adjust
the sound to the room acoustics.
왘 Select Audio Settings – Equalizer.
You can select an existing sound profile or manually adjust the equalizer.
To select an existing sound profile:
왘 Select the desired sound profile.
If one of the equalizer functions is activated, EQ appears in inverse on the
standard display.
To manually adjust the equalizer:
왘 Select Custom.
The equalizer is displayed.
DEL SAVE
Name
F
G
HANDHELD
I
J
Low Cut
Equalizer
De
-
Esser
On
Off
Off
O
u
t
pu
t
T
ype
Audio
Exit
Setting Meaning
On The low-cut filter is activated. Low-frequency noise is fil-
tered out.
This setting is recommended if you mainly want to transmit
speech.
Off The low-cut filter is deactivated. Low-frequency noise is not
filtered out.
This setting is recommended if you want to transmit music
or sound effects with a dominant bass component.
Equalizer
De-Esser
Auto Gain Control
On
Off
Off
Low Cut
Audio
Exit