Instruction manual ew D1
Table Of Contents
- Contents
- Important safety instructions
- Optimum sound the easy way
- Package contents
- Product overviews
- Putting the products into operation
- Avoiding sources of interference
- Direct line of sight recommended
- Putting the receiver into operation
- Fitting the device feet
- Mounting the rack mount “ears”
- Connecting the rod antennas to the receiver
- Mounting the receiver into a 19" rack
- Mounting a single receiver into a rack
- Mounting the rod antennas to the front of the rack
- Mounting two receivers into a rack
- Connecting the receiver to a mixing console
- Connecting receivers in a network
- Connecting the receiver to the power supply system
- Putting the bodypack transmitter into operation
- Preparing the headset microphone for use
- Attaching the clip-on microphone to clothing
- Putting the handheld transmitter into operation
- Recharging the accupack
- Using the products
- Switching the devices on or off
- Checking the charge status of the batteries or accupacks
- Checking the RF signal level
- Muting the bodypack transmitter or the SKM-S D1 handheld transmitter
- Pairing a receiver with a transmitter
- Identifying paired devices
- Using the devices in multi-channel operation
- Switching between the standard display and the extended standard display
- Using the operating menu of the receiver
- Using the buttons for navigation
- Overview of the operating menu of the receiver
- Changing the name of the radio link
- Activating/deactivating the low-cut filter
- Adjusting the equalizer
- Adjusting the de-esser
- Activating/deactivating the dynamic compression
- Resetting the audio settings
- Coarsely adjusting the output level of the receiver (Mic/Line)
- Fine-tuning the output level of the receiver
- Activating/deactivating the lock mode
- Activating/deactivating the MUTE switch of the transmitter
- Adjusting the display brightness
- Calling up help functions
- Retrieving system information
- Resetting the receiver to the factory default settings
- Changing the network configuration
- Displaying the IPv6 address
- Displaying the MAC address
- Performing a walk test (checking the reception quality)
- Controlling, monitoring or updating devices via the network
- Cleaning and maintaining the products
- If a problem occurs ...
- Specifications
- Accessories
- Manufacturer Declarations
33
Using the products
왘 Select one of the seven frequencies (50, 125, 315, 800, 2k, 5k or 10k) and
press the jog dial.
왘 Turn the jog dial to increase or reduce the selected level.
Turning the jog dial by one notch increases or reduces the level by 1 dB. You
can increase or reduce the level by a maximum of 12 dB. Your setting is rep-
resented by bars.
왘 Press the ESC button.
왘 Select the next frequency and repeat the steps.
왘 Once you have adjusted all frequency bands as desired, confirm with SAVE.
Adjusting the de-esser
You can attenuate sibilance in vocals and speech.
왘 Select Audio Settings – De-Esser.
왘 Select the desired profile.
If one of the de-esser functions is activated, DE-S appears in inverse on the
standard display.
Activating/deactivating the dynamic compression
You can activate one of the dynamic compression profiles in order to boost
very quiet passages and to attenuate particularly loud passages. You can
choose from preset profiles for different situations.
왘 Select Audio Settings – Auto Gain Control.
왘 Select the desired profile.
If one of the dynamic compression profiles is activated, AGC appears in
inverse on the standard display.
Resetting the audio settings
The Effects Reset menu item allows you to reset the receiver‘s audio settings
made in the Audio Settings menu to the factory default settings. All other
receiver settings remain unchanged.
50
+12
0
-12
EQUALIZER
125 315 800
2k 5k
10k SAVE
50 Hz
125 Hz
315 Hz
800 Hz
2 kHz
5 kHz
10 kHz
Hz
100 1k 10k
dB
+15
+10
+5
0
–5
–10
–15
20 50 200 500 2k 5k 20k
Equalizer
De-Esser
Auto Gain Control
Effects Reset
L
ow
C
u
t
Off
On
Off
Audio
Equalizer
De-Esser
Auto Gain Control
Effects Reset
Audio Level
Off
Off
On
10 dB
Audio
De-Esser
Auto Gain Control
Effects Reset
Audio Level
Output Type
On
On
10 dB
Line
Audio