User Manual

Using the EM 100 G4
66
• Activated pilot tone evaluation
• See “Advanced -> Pilot Tone menu item”
7 MUTE muting function
• Receiver or transmitter is muted
• See “Muting the audio output”
8 Battery status of the transmitter
• SKM 100 G4: see “Inserting and removing the batteries/rechargeable
batteries”
• SK 100 G4: see “Inserting and removing the batteries/rechargeable
batteries”
9 Lock-off function
• Lock-off function is activated on the receiver
• See “Lock-off function”
Soundcheck standard display
The Soundcheck standard display shows the transmission quality between
the transmitter and the receiver.
►
By doing a soundcheck, you can ensure adequate transmission quality in
the entire area in which you want to use the transmitter. You can do the
soundcheck without the help of another person.
▷ With the transmitter, walk up and down the area in which you want to
use the transmitter.
The receiver records the following parameters:
RF Min
• Minimum RF signal level
• must be well above the squelch threshold level for one of the two anten-
nas
Ways to optimize
▷ Check that the antennas and the antenna cables are correctly connect-
ed.
▷ Improve the position of the antennas.
▷ If necessary, use an antenna booster.