User Manual
Table Of Contents
- Important safety information
- Introduction
- Package contents
- Product overview
- Putting the headset into operation
- Using the headset
- Individually adjusting the headset and wearing it
- Switching the headset on and connecting it
- Switching the headset off
- Activating/deactivating the voice prompts
- Retrieving information on the remaining talk time
- Activating/deactivating the room experience (MB Pro 2 only)
- Changing the volume
- Making calls using the headset
- Managing multiple calls
- Restoring factory default settings (Reset)
- If you are out of the Bluetooth transmission range
- Cleaning and maintaining the headset
- If a problem occurs ...
- Specifications
- Manufacturer Declarations
MB Pro1 | MB Pro 2 | 21
Cleaning and maintaining the headset
Cleaning and maintaining the headset
CAUTION
Liquids can damage the electronics of the product!
Liquids entering the housing of the device can cause a short circuit and damage
the electronics.
X Keep all liquids far away from the product.
X Do not use any cleansing agents or solvents.
Cleaning the headset and the headset charger
X Before cleaning, unplug the USB plug of the charging cable.
X Only use a dry and soft cloth to clean the product.
X Clean the charging contacts of the headset and the charging contacts of the
headset charger from time to time using e.g. a cotton swab.
Replacing the ear pads
For reasons of hygiene, you should replace the ear pads from time to time. Spare
ear pads are available from your Sennheiser partner.
X Carefully remove the old ear pad from the ear cup.
X Attach the new ear pad to the ear cup by pressing firmly around the ear pad.
1 21