USER GUIDE Smart Wi-Fi LED Bulb (2700K and 5000K) Model: W11-N11
Model: W11-N11 Introduction: Sengled Wi-Fi Smart LED bulbs offer an easy solution to having smart lighting without the need for a hub. These bulbs enable you to have app-controllable lightbulbs through your existing 2.4Ghz Wi-Fi network without any additional hardware. Note: No smart home hub is required to control Sengled Smart Wi-Fi LED bulbs.
Installation Instructions: 1 Download the latest version of the Sengled Home App from the Apple App Store or Google Play Store. 2 Register a Sengled account using Sengled Home App. 3 With the power off, twist your Sengled Wi-Fi Smart LED bulb into the socket. 4 Turn on power. 5 Open the Sengled Home App, go to Devices, use + to add a new device. Follow the instructions to finish installation. If you have trouble or concerns with installation, please refer to the full user manual available at support.
Operation: A Turning bulbs on and off Wi-Fi bulbs can be controlled through a variety of means: • Manually through a wall switch • Via Sengled Home App • Through partner programs like Amazon Alexa, Google Assistant, IFTTT, etc. B Dimming Wi-Fi bulbs can be dimmed through the Sengled Home app, and partner programs like Amazon Alexa, Google Assistant, IFTTT. C Scheduling Wi-Fi bulbs can be scheduled on/off through Sengled Home app or through partner programs like Amazon Alexa, Google Assistant or IFTTT.
Frequently Asked Questions: 1. Can bulbs be used in sockets with dimmers? No, this bulb is designed to be used in on/off sockets only. 2. Can bulbs be used in enclosed fixtures? No, this bulb is not designed for fully enclosed fixtures. 3. Can this product be used outdoors? No, this bulb is designed for indoor use only. 4.Are Sengled Wi-Fi Smart LED bulbs compatible with Sengled Element Hub or other smart lighting hubs? No, hub connection is not supported and is not necessary. 5.
Product Specifications: Wi-Fi Light Bulbs Soft White Color Temperature Lamp Type Socket Daylight W11-N11 Model Number 2700K 5000K A19 Bulb E26 Brightness 806 Lumens Power Consumption 9W (rated) Replacement power 60W Dimmer Switch Compatible Lifetime (hours) Color Rendering Index (CRI) Beam Angle Warranty Voltage Operation temperature Operation humidity No 25,000 90 240 degrees 2 years 110-130 Vac -4~104°F 0–95% Diameter 2.4 in (61 mm) Height 4.4 in (113 mm) Weight 4.
Limited Warranty: 2-year limited warranty from original purchase date. To learn more about the Limited Warranty for Sengled products, please visit www.sengled.com/warranty. Support: If you encounter any issue with Sengled LED products, please visit www.sengled.com for support and troubleshooting information.
FEDERAL COMMUNICATION COMMISSION (FCC) STATEMENT FOR USERS This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference, and 2) This device must accept any interference received, including interference that may cause undesired operation. SECTION 15.