User Manual

11a/b/g Wireless Multi-Client Bridge/AP/WDS Version 2.4
36
 Please wait while the system is rebooting.
Note: Do no un-plug the device during this process as this may cause permanent
damage.
 Once the device has restarted you may need to access the management page
through a different IP address. The default IP address for Access Point mode is
192.168.1.1. Refer to Chapter 3 to configure the device in Bridge mode.
4.2.2 Firmware Upgrade
 Click on the Firmware link under the System menu. This page allows you to
upgrade the firmware of the device in order to improve the functionality and
performance. This page also displays the current firmware version and its release
date.
 Ensure that you have downloaded the appropriate firmware from the vendor’s
website. Connect the device to your PC using an Ethernet cable, as the firmware
cannot be upgraded using the wireless interface.
 Click on the Browse button to select the firmware and then click on the Upload
button.