User Manual

NOA-3570 User’s Guide
140 Chapter 14 LAN Setup
Figure 74 Menu 3.2 TCP/IP Setup
Follow the instructions in the following table on how to configure the fields in this menu.
14.3 Wireless LAN Setup
Use menu 3.5 to set up your NOA-3570 as the wireless access point. To edit menu 3.5, enter 3
from the main menu to display Menu 3 – LAN Setup. When menu 3 appears, press 5 and then
press [ENTER] to display Menu 3.5 – Wireless LAN Setup as shown next.
Menu 3.2 - TCP/IP Setup
IP Address Assignment= Static
IP Address= 192.168.1.2
IP Subnet Mask= 255.255.255.0
Gateway IP Address= 0.0.0.0
Table 47 Menu 3.2 TCP/IP Setup NOA-3570
FIELD DESCRIPTION
IP Address
Assignment
Press [SPACE BAR] and then [ENTER] to select Dynamic to have the NOA-3570
obtain an IP address from a DHCP server. You must know the IP address assigned
to the NOA-3570 (by the DHCP server) to access the NOA-3570 again.
Select Static to give the NOA-3570 a fixed, unique IP address. Enter a subnet mask
appropriate to your network and the gateway IP address if applicable.
IP Address Enter the (LAN) IP address of your NOA-3570 in dotted decimal notation
IP Subnet Mask Your NOA-3570 will automatically calculate the subnet mask based on the IP
address that you assign. Unless you are implementing subnetting, use the subnet
mask computed by the NOA-3570.
Gateway IP
Address
Type the IP address of the gateway. The gateway is an immediate neighbor of your
NOA-3570 that will forward the packet to the destination. On the LAN, the gateway
must be a router on the same network segment as your NOA-3570.
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confirm…” to
save your configuration, or press [ESC] at any time to cancel.