User Manual

7
Powering the CX Microphone
The CX-series microphones operate on phantom power. Once connected to the power
source, the CX Boundary Mic is ready to work.
Important! When integrating the CX Boundary Mic into a video or audio conferencing
system, or using it with a mixing board, make sure that phantom power is enabled.
High Pass Filter
Activate the High Pass Filter when using the microphone in rooms with inadequate
acoustic treatment or constant noise from air conditioning, fans, or lights.
To roll off low frequencies, use the tip of a pen or a similar pointed object to switch the
high-pass filter to the on position.
Muting
CX-series microphones are equipped with an easy-touch membrane mute button. To
mute the microphone while in use, press the mute button. The indicator LED will turn off
to show that the microphone has been muted.
Press the mute button again to resume operation.
Instructions
▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ..▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪