E C I L V A R U E E S AN ANG RS M D/HR ROMOTO H RV 2 E E U S ISS F O WARNING Servomotors contain magnetic material which will attract metal particles. Care should be taken when dismantling motors to avoid this. All D.C.
HD/HR55 servicing instructions 4.5 GENERAL 1.1 Before starting work on the motor, these servicing instructions should be read and fully understood. Servicing of SEM motors must be done only by suitably trained and qualified personnel, and only after such motors have been electrically isolated and removed from their mechanical drives. The jaws of any vice or clamp must be suitably protected when used to grip any part of the motor.
SEM Limited, Faraday Way, Orpington, Kent BR5 3QT England Telephone: +44 (0)1689 884700 ● Fax: +44 (0) 1689 884884 E-mail: info@sem.co.uk ● Internet http://www.sem.co.uk 1 2 3 4 5 6 7 8 9 10 11 12 13 14 14a 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 Rotor Assembly Tolerance Ring Resolver Rotor Resolver Body Spacer (Non tacho motors only) Tachogenerator Rotor Assembly P.C.B. Assembly N.D.E. Bearing Bearing Retaining Circlip D.E. Bearing Bearing Retaining Circlip D.E. Cover D.E.
HD/HR70 servicing instructions GENERAL 1.1 Before starting work on the motor, these servicing instructions should be read and fully understood. Servicing of SEM motors must be done only by suitably trained and qualified personnel, and only after such motors have been electrically isolated and removed from their mechanical drives. The jaws of any vice or clamp must be suitably protected when used to grip any part of the motor.
SEM Limited, Faraday Way, Orpington, Kent BR5 3QT England Telephone: +44 (0)1689 884700 ● Fax: +44 (0) 1689 884884 E-mail: info@sem.co.uk ● Internet http://www.sem.co.uk 1 2 3 4 5 6 7 8 9 10 11 12 13 14 14a 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 Rotor Assembly Tolerance Ring Resolver Rotor Resolver Body Spacer (Non tacho motors only) Tachogenerator Rotor Assembly P.C. B. Assembly N.D.E. Bearing Bearing Retaining Circlip D.E. Bearing Bearing Retaining Circlip D.E. Cover D.
HD/HR92 servicing instructions 1 GENERAL 1.1 Before starting work on the motor, these servicing instructions should be read and fully understood. Servicing of SEM motors must be done only by suitably trained and qualified personnel, and only after such motors have been electrically isolated and removed from their mechanical drives. The jaws of any vice or clamp must be suitably protected when used to grip any part of the motor.
SEM Limited, Faraday Way, Orpington, Kent BR5 3QT England Telephone: +44 (0)1689 884700 ● Fax: +44 (0) 1689 884884 E-mail: info@sem.co.uk ● Internet http://www.sem.co.
HD/HR115 servicing instructions 1 GENERAL 1.1 Before starting work on the motor, these servicing instructions should be read and fully understood. Servicing of SEM motors must be done only by suitably trained and qualified personnel, and only after such motors have been electrically isolated and removed from their mechanical drives. The jaws of any vice or clamp must be suitably protected when used to grip any part of the motor.
SEM Limited, Faraday Way, Orpington, Kent BR5 3QT England Telephone: +44 (0)1689 884700 ● Fax: +44 (0) 1689 884884 E-mail: info@sem.co.uk ● Internet http://www.sem.co.
HD/HR142 servicing instructions 1 GENERAL 1.1 Before starting work on the motor, these servicing instructions should be read and fully understood. Servicing of SEM motors must be done only by suitably trained and qualified personnel, and only after such motors have been electrically isolated and removed from their mechanical drives. The jaws of any vice or clamp must be suitably protected when used to grip any part of the motor.
SEM Limited, Faraday Way, Orpington, Kent BR5 3QT England Telephone: +44 (0)1689 884700 ● Fax: +44 (0) 1689 884884 E-mail: info@sem.co.uk ● Internet http://www.sem.co.
BMR/HD/HR190 servicing instructions 1 GENERAL 1.1 Before starting work on the motor, these servicing instructions should be read and fully understood. 1.2 Servicing of SEM motors must be done only by suitably trained and qualified personnel, and only after such motors have been electrically isolated and removed from their mechanical drives. 1.3 The jaws of any vice or clamp must be suitably protected when used to grip any part of the motor. 1.
SEM Limited, Faraday Way, Orpington, Kent BR5 3QT England Telephone: +44 (0)1689 884700 ● Fax: +44 (0) 1689 884884 E-mail: info@sem.co.uk ● Internet http://www.sem.co.
REMOVAL OF AC TACHO REMOVAL OF AC TACHO Instructions common to HD 55, HD 70, HD 92, HR 92 Instructions common to HD 92, HR 92, HD 115, HR 115 HD 142, HR 142, BMR 190/HD 190 Extreme care to be taken during the removal and reassembly of the Tacho. When stripping Tacho Motor, Tacho parts must be removed first. 1. Disconnect leads at feedback connector 2. Undo screws holding PCB board and lift off 3. Undo screws holding Tacho stator in N.D.E. cover and lift out. 4.