Safety Data Sheets (SDS)

ManualsBrandsSell Even ManualsAluminum Siding8" Textured White Aluminum Lap Siding

Safety Data Sheet

Page 1 of 7

1. Product and Company Identification

Material Name

Chemical Formula

Synonym(s)

Recommended Use

Manufacturer Information

Emergency Phone Number

Aluminum Sheet Coil – Bare and Coated

Mixture

Alloys Series 3105, 3004

Various fabricated aluminum parts and products

Jupiter Aluminum Corporation

1745 165

Street

Hammond, IN 46320

Environmental, Health & Safety 1-219-933-2752

General Information 1-219-932-3322

Jupiter Coil Coating

205 East Carey Street

Fairland, IN 46126

Environmental, Health & Safety 1-219-933-2752

General Information 1-219-932-3322

Jupiter Coil Coating

8963 River Road, Suite 100

Wellsburg, WV 26070

Environmental, Health & Safety 1-219-933-2752

General Information 1-219-932-3322

ChemTel Expert Assistance 1-800-255-3924

2. Hazard

s Identification

Classification

Potential Health Effects

Label Elements

Hazard Pictograms

Signal Word

Hazard Statements

Precautionary Statements

Other Hazards

The mixture does not meet the criteria as hazardous to health or the

environment.

Product as shipped does not present any health hazards. Dust and fumes

from processing can cause potential irritation of the eyes, skin and upper

respiratory tract. Please see Section 4 for additional health information should

processing of this product result in the formation of dust or fumes.

Not applicable.

Warning

May form combustible dust concentrations in air.

Prevent dust accumulation to minimize explosion hazard.

Non-combustible as supplied.

Explosion/fire hazards may be present when:

· Dust or fines are dispersed in air,

· Chips, fines or dust are in contact with water,

· Dust and fines are in contact with certain metal oxides (e.g., rust,

copper oxide),

· Molten metal in contact with water/moisture.

Summary of content (7 pages)

PAGE 1
Safety Data Sheet 1.
PAGE 2
Safety Data Sheet 3.Composition / Information on Ingredients Composition Aluminum alloys are comprised of various combinations of the elements shown. Complete composition may include some components classified as non-hazardous.
PAGE 3
Safety Data Sheet (metal fume fever) or the accumulation of fluid on the lungs ( pulmonary edema). Long term, chronic overexposure can cause asthma or other diseases of the lungs and respiratory system. Combustion of the coating can generate hydrogen chloride, hydrogen fluoride and other by-products of combustion. Short term overexposure can cause severe irritation of the respiratory system.
PAGE 4
Safety Data Sheet Additional information For more information on the handling and storage of aluminum contact The Aluminum Association, 1525 Wilson Boulevard, Suite 600, Arlington, Virginia 2220, www.aluminum.org. It has a number of publications, including: Ø Guidelines for Handling Molten Aluminum Ø Guidelines for Handling Aluminum Fines Generated During Various Aluminum Fabricating Operations 8.
PAGE 5
Safety Data Sheet Vapor Density Relative Density Water Solubility Partition Coefficient Auto-ignition Temperature Decomposition Temperature Viscosity Not Applicable. Not Determined Insoluble. Not Applicable. Not Applicable. Not Applicable. Not Applicable. 10. Chemical Stability and Reactivity Information Reactivity Stable and non-reactive under normal conditions of use, storage and transportation as shipped. Chemical Stability Stable under normal conditions of use, storage and transportation as shipped.
PAGE 6
Safety Data Sheet can cause irritation of the eyes, nose and upper respiratory tract. Combustion of the coating can generate Carbon Monoxide, Carbon Dioxide, Hydrogen Chloride, Chlorinated Hydrocarbons, Hydrogen Fluoride and partially oxidized hydrocarbons. Information on likely routes of exposure Due to the form of the product as shipped, this is not relevant. Dust and/or fume from processing can cause irritation to the eyes, skin and upper respiratory tract from inhalation.
PAGE 7
Safety Data Sheet 15. Regulatory Information CERCLA/SARA – Hazardous Substances and Reportable Quantities Chromium (7740-47-3) 5,000 pound final RQ (No reporting of releases of this hazardous substance is required if the diameter of the pieces of the solid metal is larger than 100 micrometers. CERCLA/SARA –Section 313 – Emissions Reporting Aluminum (7429-90-5) 1.0 % de minimis concentration (dust or fume only) Chromium (7440-47-3) 1.0 % de minimis concentration Manganese (7439-96-5) 1.