User's Manual
Mes. Settings
Allows you to change the measurement settings.
Changing the Mes. Settings
c
Important:
❏ When performing GPS positioning, make sure
the screen is facing up and you are outside with
no obstructions overhead.
U “Specifying a GPS (GPS Positioning)” on
page 29
❏ It usually takes less than two minutes to
complete GPS positioning.
If GPS positioning is not complete after two
minutes or Failed is displayed, we recommend
selecting Cancel, moving to a different
location, and trying again.
Operation buttons
A
Display the measurement screen.
Use one of the following methods to display.
❏ When performing GPS positioning:
Press C on the time screen.
❏ When skipping GPS positioning:
Press C on the time screen, and then select
Skip on the GPS positioning screen.
U “Skipping GPS positioning” on
page 30
❏ When not performing GPS positioning
(Indoor mode: SF-710/SF-510 only):
Press C on the time screen.
U “Indoor mode (SF-710/SF-510 only)”
on page 31
B
Displays the Mes. Settings menu.
Hold down B on the measurement screen.
C
Select a setting item.
Use C/D to select, and then press A.
D
Select a setting value.
Use C/D to select, and then press A.
Depending on the setting item, you may need to
make more settings after this. Follow the
on-screen instructions.
Note:
When setting a number, hold down C/D to speed
through the numbers.
SF-710/510/310 User's Guide
Settings
89