User Manual

User Manual

36 / 37

6.1.3 Dos and Don’ts in Installing Sensor Probes

The same instruction applies to installing the different Sensor Nodes. However, there are some tips to

keep in mind when installing certain Sensor Nodes.

⚫ Light Sensor

The Sensor Probe of the Light Sensor needs to be placed vertically upward, and there should not be

anything obstructing sunlight from the Sensor Probe.

⚫ CO2 Sensor

The Sensor Probe can be fastened with self-drilling screws. Please refer to the image below for the

probe direction. The end without the cables should point downward to prevent rain or dust from

getting into the probe. Also, the device should be in a place with good ventilation.

⚫ Use outdoors for a long time

If the sensor has wires, install threaded tubes: