Digital Wireless Outdoor Camera DigioutLCD User’s Manual Digital Wireless Security System 7” LCD/SD Recorder & One Digital Wireless Outdoor Camera with Night Vision and Audio
© Copyright 2014 This manual is furnished under license and may be used or copied only in accordance with the terms of such license. Except as permitted by such license, no part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or any means, electronic, mechanical, recording, or otherwise, including translation to another language or format, without the prior written permission of SecurityMan.
Warranty SecurityMan Inc warrants that this product will be free from defects in title, materials and manufacturing workmanship for one year or otherwise specified on the product packaging. This limited warranty shall commence from the date of purchase. SecurityMan products warranty is not transferable and is limited to the original purchaser. If the product is found to be defective then, as your sole remedy and as the manufacturer’s only obligation, SecurityMan will repair or replace the product.
Table of Contents Introduction Important Restrictions Package Contents Features Product Basics Camera (SM-804DT) LCDDVR/Receiver (SM-371DR) Quick Start On-Screen Display Single Channel Full Screen Display Quad Screen Display Playback Screen Display Operation Snap Shot button Record button Camera button Quad Screen button Menu button Exit button Volume Control (up/down/left/right buttons) Menu Setup Settings Brightness Motion Detection Sensitivity Motion Detection Action Motion D
Introduction Thank you for choosing our DigioutLCD. The DigioutLCD is a complete “Do it yourself” (DIY) digital wireless security system. The DigioutLCD comes with one weatherproof digital wireless camera and a 7” LCD/SD DVR combo. Compared to full version digital video recording (DVR) systems, the DigioutLCD is much less complicated to operate, much more affordable and can be installed in minutes.
poetntially influences heart pacemaker and thus leads to respiratory disturbance. • DO NOT use this product to monitor equipments or activities that are relevant to one’s privacy. Monitoring one’s private activities without consent is illegal and this product is not designed and manufactured for these purposes. 1. Monitoring of equipments or activities concerned directly to people’s privacy. 2. Monitoring related to people’s antiques or rare articles.
• DO NOT use it aboard airplane; please abide by the airway’s provision. It might influence communication and the flying apparatus if departing from airway’s regulation. This will result in accident, sever physical injuries, and possible death. • DO NOT put the camera in wet places where water might splash or where rainwater and mist might erode(except weather-proof) • DO NOT disassemble or repair the camera, receiver, or other relevant peripheral equipments by yourself.
• DO NOT use the receiver on the surface of thermo labile material. Please embed thermal insulating material when using on the surface of the thermo labile. • DO NOT place or use the AC adapter on temperature sensitive materials. The above practice might cause the plastic distortion, fading or sticking on the surface. • DO NOT touch, shake or hold the antenna. It might influence the receiving of electromagnetic wave, and thereby influence the receiving effect.
• DO NOT use the camera in the places which are covered with metal. The around metal, such as elevator and cabin, might shield the electromagnetic wave, and result in inability to received signals.
Package Contents 1x Camera (visor/bracket) Mounting Screws 1x Monitor (SM-371DR) User’s Manual 6 2 x AC/DC Adapters Camera: 12VDC/ 1.5A Monitor: 12VDC/ 1.
Features • Do-it-yourself (D.I.Y) easy to setup and use 2.4GHz digital wireless recording system • Space saving 7” LCD monitor with an Integrated SD digital video recorder (SD card not included) • Simple installation. No video cables required.
Product Basics Camera (SM-804DT) Sun Visor IR Light Sensor Camera Digital Wireless Outdoor Camera Antenna Pairing button Mat ch cod e Dig ita le ire lW ss Ou tdoo am rC era Po we r Mic Power LED Mic Power Cable Mounting bracket 8
LCDDVR/Receiver (SM-371DR) LCD Stand (fold-in) Antenna ON/OFF Switch 7” LCD SD Card Slot AV Out DC IN 12V 9
Quick Start 1. Fasten the antennas to the cameras, and mount the cameras in the desired location. Then connect the power adapters to the cameras. The power adapters for the cameras are 12VDC/ 1.5A CAUTION: To prevent electric shock or damages to the cameras, please make sure to properly insolate the camera’s power connections if being used as an outdoor application. Digital Wireless Outdoor Camera NOTE: Before mounting the cameras, please do a quick reception quality test before mounting the cameras. 2.
3. You will see a brief start up screen followed by a live image and be able to hear audio from the camera’s microphone as show below. Press the Snap Shot button or the Record button to initiate manual recording.
Date and Time The Date and Time is displayed in the following format: Year/Month/Date Day HR:Min Note: Please refer to System Settings in the user’s manual for information on how to change the time and date. Snap Shot A small camera icon will appear at the top of the screen during manual or motion detected Snap Shot recording. Record The red • (REC) icon and recording duration time will appear at the top of the screen during manual or motion detected video recording.
Quad Screen Display Black Screen Camera Camera In “Quad Screen”, the camera numbers located in the center of the screen corresponds to each of the 4 channels available on the LCDDVR. You can toggle between cameras by simply pressing the Camera button on the LCDDVR until the desired camera number is highlighted. Black Screen A black screen represents a channel with no camera paired to the LCDDVR. By default you will not be able to toggle to any channel that does not have a camera allocated to it.
Playback Screen Display Loop Video Duration/Length Play Image Number File Name File Name The File Name identifies the current video/picture being played. The File Name is also the starting time of the video, in the format of HH-MM-SS. The number after the last dash represents the camera channel number of the recorded file being played. NOTE: LCDDVR records video in mp4 format, and records picture in jpg format.
Image Number The image number is only viewable during photo playback and represents the total amount of files in the current folder and the current file being viewed. Operation Antenna 7” LCD OK Direction Key Snap Shot button The Snap Shot button gives you the ability to take an instant manual photo (jpeg) of activities showed on the LCD screen and are automatically stored on the SD card. Record button The Manual Record button offers continuous recording.
• In Single Channel Full Screen Display you can use the Camera button on the LCDDVR to toggle through all four cameras in single channel full screen display and then press the Record button to start recording when the desired camera is being displayed on the screen. NOTE: Recording in single camera independently will lock the LCDDVR to that channel preventing it from being able to toggle to any other available cameras.
Menu Setup Press the Menu button on the DVR/Receiver at any time to enter the Main Menu Setup window as shown below. Then use the UP, DOWN, LEFT, and RIGHT buttons to toggle through the menu options, press the OK button to select, save the changes, and press the EXIT button to exit from the selected menu screen. NOTE: The system will automatically exit from the menu options if inactive for 20 seconds. Settings From the menu screen select system Settings as illustrated below.
• Brightness To adjust the brightness level of the DVR/Receiver, simply highlight and press OK on the Brightness option in the system settings. Use the UP, DOWN, LEFT, and RIGHT buttons to make your adjustments and press the OK button to save your changes.
• • Sensitivity In the Motion Detection submenu, highlight and press OK on Sensitivity to adjust the sensitivity option for the motion detection recording feature. Options include: Never (off), Low (17’), Medium (25’), and High (30’). NOTE: Multi –channel motion detection recording only works in “Quad” view. The LCDDVR will NOT record if camera 1 is being viewed as a single camera and motion is detected on camera 2 .
• • Motion Detection Alert In the Motion Detection submenu, highlight and press OK on Motion Detection Alert to enable or disable the audible alert notification that can be heard whenever motion is detected. Options include: ON and Off. • Date and Time It is highly recommended to set the date and time on the system prior to recording. To do this simply highlight and press OK on the Date and Time option.
• TV Standard To change the TV Standard on your LCDDVR, simply highlight and press OK on the TV Standard option. Use the UP, DOWN, LEFT, and RIGHT buttons to make your selection and press the OK button to save your changes. Options include: NTSC (Default, North America) and PAL (UK/Europe). NOTE: Please check your country TV Standard for proper setup. • Language To change the system language, highlight and press OK on the Language option.
• System Information The System Information option displays important information about your LCDDVR such as: System ID, Firmware, Total Size, and Free Space available on your SD card. To view this information simply highlight and press OK on the System Information option.
• Play Folder (Playback from Recorder) The Play Folder is used to view and playback recorded events stored on your SD Card and consist of 2 subfolders labeled Movies and Photos. To playback or view the recorded files stored on your SD card simply highlight and press OK on the Play Folder option to access the subfolders.
Once inside, you can use the Up and Down buttons to highlight the dated folder that you would like to review and press the OK button to view its recorded events. At this point you can now highlight and select the recorded video file that you would like to playback by pressing the OK button on the selected file. During playback, you can skip to the previous or next recorded event by using the LEFT and RIGHT buttons and also control the volume level by using the Up and Down buttons.
Once inside, you can use the Up and Down buttons to highlight the dated folder that you would like to review and press the OK button to view its recorded events. At this point you can now highlight and select the photo that you would like to view. While viewing an image you can use the LEFT and RIGHT buttons to skip or go back to the next/previous file. TIP: Once you have selected an image to view, you can press the REC button on the LCDDVR to enable/disable a 3 second auto loop feature.
• PC Playback Since DigiLCDDVR stores recorded data into an SD memory card, playback recorded files can be played back on the DigiLCDDVR system or the SD card can be ejected from the DigiLCDDVR and plug into a media card reader on a PC to read, playback, delete, and backup files(s). The video files are saved in Videos folder; the picture files are saved in Photos folder.
• SD Format SD Format is an important feature that should always be used whenever a NEW SD card card is being used prior to recording to ensure proper compatibility format between the LCDDVR and the card. To utilize this feature simply highlight the SD Format option and press the OK button. Next use the LEFT and RIGHT buttons to make your selection, and the OK button to confirm. NOTE: The SD Format option will erase everything on the SD card.
• Auto Scan Auto Scan is used to set up an automatic camera rotation period between cameras 1-4. Simply highlight and press OK on Auto Scan. Use the Up and Down buttons to make your selection and press the OK button to save your changes. Options include: Never (default), 5 seconds, 10 seconds, 15 seconds, and 20 seconds. NOTE: You can manually toggle between cameras 1-4 by pressing the Camera button on the LCDDVR.
• • Adding Cameras To add a camera to your system simply highlight any of the available cameras/channels (unlocked) and press the OK button on the LCDDVR. Once selected, a confirmation screen will pop up asking you to confirm (YES) or cancel (NO) your selection, use the LEFT and RIGHT buttons to make your selection and press the OK button to confirm. During the registration process a pop up window showing “Add/Remove Camera” will be displayed for approximately 10 seconds.
• • Removing Cameras To remove a camera from your system, simply highlight the selected camera to be removed and press the OK button on the receiver.
RIGHT buttons to make your selection and press the OK button to confirm the removal. • Refresh Rate Refresh Rate is a video filter that reduces flickering effects in the interlaced video and eliminates flash caused by fluorescent lights. Use the Up, Down, LEFT and RIGHT buttons to make your selection and press the OK button to save your changes. Options include 50Hz or 60Hz. Exit The monitor icon shown below is only used to exit from the main menu.
Specifications SM-804DT (camera) SM-371DR (LCD monitor/ receiver) Image Sensor Resolution Viewing Angle Lens IR-CUT Audio Minimum Illumination IR LED Night Vision Range Weatherproof Rating Antenna Consumption Current Mounting Bracket Power LED Indicator Power Supply Dimensions (LxWxH) Pairing Button Display Modes CH Switch Intervals Frame Rate Recording Resolutions Recording Modes Recording Format Motion Detect Video Clip/Size SD Slot Control Buttons Wireless (general) LED Indicators Power On/Off AV Ou
