User`s manual

Installation and usage

Installed in living rooms, bedsides, carry along, etc.•

For emergency use, scared away intruders; sends out emergency signal to alarm host to sound off the siren(s). This is a 24 hour standby •

zone for panic or emergency use only.

Please change the battery when the signal distances become shorter or every 2 years. •

Adding and Cancelling Panic Button

To Add:

Press_• SET + Password + ENT_then.

_• 70 + ENT+ XX + ENT The “Learn” light will appear solid red.

Note: The “XX” indicate group number of the 24 hour defense zones, including zone 01 through zone 05.

Press the “Alarm button” twice consecutively, the alarm host will beep in series, the “Learn” light will flashes five times and then turns off to •

indicate the panic button has been successfully added.

To Cancel:

Press_• SET + Password + ENT_then.

_• 71 + ENT+ XX + ENT The alarm host will beep twice, the “Learn” light will flash once and then turns off to indicate the panic

button has been successfully cancelled.

Note: The alarm host can only learn 1 wireless device (Panic Button) at a time, a total of 4 wireless devices (Panic Buttons) to a zone/group can be

added. If 1 device is removed from a group that has 4 devices, then all 4 devices in the group will be automatically removed, and each device(s) will

have to be added again to the alarm host.