Instruction manual

- 42 -

 ESC

Press this button to escape from Motion Detection Setup, and return to Motion

Setup.

6.3 Alarm Setup

In Setup Menu display, press ▲▼ to change the highlighted option to Alarm, and

then press ENTER to call up Alarm Setup display as shown. The Alarm Setup

allows the administrator to define the attributes for each alarm input, and the actions

if it’s triggered. There are up to 16 alarm inputs which can be connected to the

system.

The general operations are as below:

 ▲▼◄►

Press these buttons to select the items. The display will scroll left/right if the

selected item is not shown on the screen.

 Numeric (ENTER)

Press these buttons to select the alarm input.

 COPY



Press this button to copy the settings of the focus alarm input to all the following

alarm inputs. (EX. focus alarm input is 5, its settings will be copied to those of

alarm inputs 6-16.)

 ESC

Press this button to escape from this screen, and return to Setup Menu display. If

the Save dialog is shown, press ENTER to exit and save, ESC to exit without

saving.

SCW-7709 & SCW-7716 Users Manual