Instruction manual

- 38 -

Following is a brief description for each item and its specific operations:

 Duration – response duration to define at most how long (in seconds) the Alarm

Out relay and the Buzzer will keep being triggered after video loss is detected for

this camera. However, the Alarm Out relay and the Buzzer will be reset

immediately once the camera returns to normal. Press +/- buttons to adjust the

value (3 seconds - 60 minutes, discrete, ‘-‘ for ‘Forever’).

 Pre-record – to define how long before video loss is detected this camera shall be

intensively recorded at Pre-record IPS. Press +/- buttons to adjust the value

(0-60 seconds, discrete). Please note that the actual pre-record time may be

shorter than the value set if the total size of the pre-record pictures exceeds the

pre-record buffer size of the system.

 Alarm Out – to define which Alarm Output will be triggered when video loss of

this camera is detected. Press +/- buttons to select none (N/A) or one of the

Alarm Outputs (1-4).

 Buzzer – to activate the internal Buzzer or not when video loss of this camera is

detected. Press ENTER or +/- to check/uncheck this item. The default setting

is “” - checked.

 Log – to log to event logs or not. Press ENTER or +/- to check/uncheck this

item. The default setting is “” - checked.

 Screen Message – to display the event message on the screen or not. Press

ENTER or +/- to check/uncheck this item. The default setting is “” - checked.

 E-mail – to send the event e-mail to remote station or not. The e-mail will be

sent to the predefined receivers at the moment when the event is triggered. Press

ENTER or +/- to check/uncheck this item. The default setting is “” -

unchecked.

6.2.2 Motion Setup

In Camera Setup, press ENTER to call up Motion Setup as shown when the

highlighted option is Motion Settings.. of the camera to setup. The Motion setup

allows the administrator to define how the system responds to the detected motion for

the camera.

SCW-7709 & SCW-7716 Users Manual