Instruction manual

- 29 -

 Connect/Disconnect – If the specific backup device is disconnected (as shown in

Current Status), please plug the USB device in one of the USB ports of the system

and/or insert a DVD for DVD device, and then press ENTER to command the

system to connect with the device. If the specific device is already connected

(EX. Read/write, as shown in Current Status), please press ENTER to command

the system software to disconnect with the device, and then unplug the backup

device from the backup port.

Note 1: Please DO NOT format the DVD disc for better performance and

compatibility.

Note 2: Before using USB pen drive, please format it to FAT32 file system by

MS-Windows.

Note 3: The backup device has to be connected by the system software before it

can be used to read/write.

Note 4: Some backup devices may have compatibility problems. Please contact

your local dealer or installer for the supported devices.

Note 5: For internal DVD, please open the front door in order not to block the

tray from ejecting, esp. while it’s in backup process. Blocking the tray

from ejecting may damage the DVD writer.

 Backup

Press ENTER when this item is selected to backup the configurations of this unit

to the corresponding USB device.

 Restore

Press ENTER when this item is selected to restore the configuration files in the

corresponding USB device to this unit.

Some USB 2.0 Devices Tested

USB-Storage Enclosures 5.25” –

Macpower’s Alumni Prefect USB 2.0 - PF-U2MS.

USB-Disk Storage –

Transcend’s JetFlash 150/V60 Series,

’s

’s

’s

’s

’s

SCW-7709 & SCW-7716 Users Manual