Installation guide

Some CX19 modems have a dial-up/leased-line switch on the side. If the modem being used does, verify that the
switch is in the up position (See Figure 2-12) . If the modem does not have this switch, continue with step 3.
2.
Figure 2-12. Modem Dial-Up/Leased-Line Switch
Locate the 16 DIP switches and verify that they are set CORRECTLY (See Figure 2-13). If necessary, use the end
of a paper clip, or similar pointed instrument, to change the switch settings.
3.
Figure 2-13. Modem DIP Switch Settings
Connect one end of the telephone cable to the modem LINE connector and the other end to the telephone wall jack
as shown in Figure 2-14 .
4.
Figure 2-14. Connecting the Modem Telephone Cable
Installing the Core Components
file:///H|/CSDoc/leoinstall/chapt2.htm (10 of 14) [01/14/2000 3:50:40 PM]